Reanin K2000 Pneumatic High Pressure Polyurethane Spray Injection Insulation Spraying ...

Xiamen Goldenbridge Imp. & Exp. Co., Ltd. / 2022-07-04

Reanin K2000 Pneumatic High Pressure Polyurethane Spray Injection Insulation Spraying ...

=== Base Info ===

=== Description ===

Basic Info.

Model NO. K2000 Computerized Non-Computerized Certification CE, ISO9001:2008, SGS Drive Mode Full Pneumatic Clean Mode Self-Cleaning by Air Applicable Materials Polyurethane The Ratio of Raw Material 1:1 Max Working Pressure 15MPa Max Output 10kg/Min Max Heated Hose Length (Optional) 45m Transport Package Plywood Case Specification 90*75*143CM Trademark Reanin Origin Shandong HS Code 8424899990 Production Capacity 80 Sets/ Month

Product Description

K2000

Reanin K2000 Pneumatic High Pressure Polyurethane Spray Injection Insulation Spraying Machine
Description
Reanin-K2000 is a portable, economical and practical polyurethane spray and injection machine, suitable for two-component polyurethane spray technology. It is small in size, easy to operate and maintain, and is especially suitable for small area projects.

Application
construction, automobile, road, railway, shipbuilding, mining, petroleum, electrical, and other industries.
Reanin K2000 Pneumatic High Pressure Polyurethane Spray Injection Insulation Spraying MachineReanin K2000 Pneumatic High Pressure Polyurethane Spray Injection Insulation Spraying Machine



Advantages
1.This machine has pass the CE certificate,
2.Panel with operation tips is easy to set up,
3.Fully pneumatic design, it can work normally  without electricity,
4.The booster pump is simple in structure and easy to disassemble and maintain,
5.The stop reset function can make the booster pump shafts always infiltrated in the booster pump, which can avoid damage to the seals and booster pump shafts caused by ISO crystallization,
6.A/B/Hose independent temperature control, can set different temperatures separately, adapt to the temperature requirements of different material,
7.Variable frequency temperature control mode and special real-time temperature collection sensor ensure that the material temperature is controlled within a small fluctuation range,
8.The integrated heated hose is covered with wear-resistant insulating sleeve, which not only can effectively keep the temperature of the material, but also can prevent the occurrence of leakage, short circuit, etc.
9.The transfer pumps, mainframe and spray gun are equipped with filtering devices, which can effectively filter impurities and crystals in the materials and reduce the occurrence of the blocking gun,
10.High-precision pressure gauges are available in MPA and PSI to meet the needs of different customers,
11.Equipped with an action counter to accurately calculate the amount of raw materials,
12.The spray gun is made of alloy material, light weight, less wearing parts, easy to use and maintain.
Reanin K2000 Pneumatic High Pressure Polyurethane Spray Injection Insulation Spraying MachineReanin K2000 Pneumatic High Pressure Polyurethane Spray Injection Insulation Spraying MachineReanin K2000 Pneumatic High Pressure Polyurethane Spray Injection Insulation Spraying Machine
Reanin K2000 Pneumatic High Pressure Polyurethane Spray Injection Insulation Spraying MachineReanin K2000 Pneumatic High Pressure Polyurethane Spray Injection Insulation Spraying Machine

Technical Parameters
 
ModelReanin-K2000 Polyurethane Spray Machine
Applicable materialsPolyurethane
The ratio of raw material1:1
Viscosity range of raw materials200-1000CPS (under working temperature)
Max working pressure15MPa
Max fluid temperature80°C
Max output10kg/min
Max heated hose length (Optional)45m
Heater power3000W×2
Heated hose max power2000W
Drive modeFull pneumatic
Clean modeSelf-cleaning by air
Voltage (Optional)Single phase 220V 50Hz or Three phase 380V 50Hz
Whole power9kw
Pneumatic source0.5-0.8Mpa 1m³/min

Standard Configuration:
Reanin K2000 Pneumatic High Pressure Polyurethane Spray Injection Insulation Spraying Machine

 
Reanin-K2000 mainframe1 set
Reanin spray gun1 set
Transfer pump2 sets
Heated hose15m
Transfer pump hose2 pcs
Whip hose2 pcs
Air pipe1 set
Tools and spare parts1 set
English user manual1 set

Transportation Parameters (Based on standard configuration):
 
ModelReanin-K2000 Polyurethane Spray Machine
Package size (LXWXH)90X75X143cm
Net weight151kg
Gross weight185kg


FAQ

Reanin K2000 Pneumatic High Pressure Polyurethane Spray Injection Insulation Spraying Machine
About us:

Shandong Reanin Machinery Co.,Ltd is one of the leading manufacturers of polyurethane and polyurea equipment in China. It has a modern production plant of over 2,000 square meters and an excellent team of engineers. Our products are exported to more than 30 countries and regions, serving more than one thousand customers around the world.Shandong Reanin Machinery Co.,Ltd has five carefully designed products for different customers. K2000 and K3000 are pneumatic spray machine, for spraying polyurethane. The K5000 is an ultra-high pressure pneumatic machine that can spraying polyurethane and polyurea both. K6000 and K7000 are hydraulic driven machine for spraying polyurethane and polyurea both. Shandong Reanin Machinery Co.,Ltd not only provides polyurethane polyurea spray equipment, but also provides related products, such as polyurethane materials, polyurea materials, generator sets and air compressors, etc. We provide customers with professional polyurethane and polyurea industry solutions. Welcome to contact us!

Reanin K2000 Pneumatic High Pressure Polyurethane Spray Injection Insulation Spraying Machine

Copyright 2024 357th.com All Rights Reserved