Industrial Polyester Woven Airslide Fabric Belt

• Type：EP100
• Material：Polyester
• Inside Material：Polyester
• Tensile Strength：Strong
• Product Name：Industrial Polyester Woven Airslide Fabric Belt
• Product Describe：Air Slide Fabric Belt

=== Base Info ===

• Model NO.：PE
• Weight：4000G,M2
• Air Pressure Loss：350PA @ 400m3,M2,H
• Warp Tensile Strength：6000n,Cm @ 2cm Length Sample
• Weft Tensile Strength：3000n,Cm @ 2cm Length Sample
• Width：100 - 2800mm
• Working Temperature：-60 - 150 Degree
• Short-Time Working Temp.：200 Degree
• Warranty：One Year
• Transport Package：Bags
• Specification：customization
• Trademark：CNP
• Origin：China
• HS Code：5910000000
• Production Capacity：20000, Month

=== Description ===

Basic Info.

Model NO. PE Weight 4000G/M2 Air Pressure Loss 350PA @ 400m3/M2/H Warp Tensile Strength 6000n/Cm @ 2cm Length Sample Weft Tensile Strength 3000n/Cm @ 2cm Length Sample Width 100 - 2800mm Working Temperature -60 - 150 Degree Short-Time Working Temp. 200 Degree Warranty One Year Transport Package Bags Specification customization Trademark CNP Origin China HS Code 5910000000 Production Capacity 20000/ Month

Product Description

INTRODUCTION

We provide Airslide belt for conveying bulk material by air gravity. The main use of Airslide belt is discharging, declining transportation or homogenizing the powder or small granular material in quiescent condition. Our airslide belt is named as Airslide fabric, Airslide membrane, Air slide cloth, Air slide canvas, Air permeable fabric, and Fluidization cloth, fluidising fabric, etc by our customer. We adopt 100% polyester for airslide fabric material. 

Our fabrics can be used at temperatures between -60°C and +150°C. The airslide fabrics are made from polyester yarns. 
We are also, however, able to weave fabrics to our customers' specific demands for air permeability and mechanical strength.
 

Advantages

No moisture absorptionNo cakingResistant to rotting and decompositionComplete unloading without residuesConsistent fluidization over the complete surfaceGood resistance to abrasionLow wear and therefore longer lifeLow shrinkage even when used under hot and humid conditions

Working principle

In cement plant: 
An Airslide belt is in the middle of a chute. Powder material will come into the chute above Airslide belt. Material will flow to the chute lower side as pneumatic blower down Airslide belt. That's why we say Airslide belt can move powder material because of the wind power. And then, the rest wind will go out from the top of the chute. Through the moving, no parts moved except powder material. So that it can spare more energy and maintain cost, etc.

In fluidization silo:
Our Airslide canvas is installed on the surface of the silo bottom. It is supplied for installation as aeration units on the sloped conical bottoms of bins and silos to aid in the withdrawal of dry relatively free-flowing material.

Each Airslide aeration unit package consists of 200mm open-type. Airslide conveyor units in lengths of 1.5 or 3m depend on the slope length of the conical storage area. Some spoke patterns are normally used with materials which have good fluidization characteristics. Others spoke patterns provide maximum aeration for difficult materials which can be fluidized.

In cement vessel's hold:
The sloped bottom of the cargo hold is covered with fluidizing panels. Our airslide fabric is on the surface of fluidizing panels. Rotary piston blowers supply the panels with oil-free compressed air and make the cement flow to the lowest point, where the discharge gate is installed.   

Air slide fabric for particulate material transportation. Another name: Air slide cloth, pneumatic fluidizing canvas

Specification data:

Raw Material =100% spun fiber polyester

Weight in average = 4000 g/m2
Thickness = 5mm
Mean Air Permeability = 400 m3/m2h @350H2O

Pressure: 2000pa for middle air resistance

                   4000pa for high air resistance

Breaking Strength- Warp=>6000 N/5cm X 20cm
Breaking Strength- Weft= >3000 N/ 5cm X 20cm
Breaking Elongation - warp=<5%
Breaking Elongation -weft=<5%

Max Width: 2800mm

Operating Temperature  < 150 deg.C
Recommended Maximum Continues <180 deg.C
Recommended Maximum Surge = 180 deg.C

Company Information

CNP Co., Ltd. was founded in 2008, specializes in the field of air pollution control and bag filters. Including engineering design, planning, consulting, equipment research and development, manufacturing, sales, installation and commissioning, as well as production and services.

Based on the high starting point, CNP Co., Ltd., with a positive and upward pioneering spirit, will further create brilliancy as to technological innovation, intellectual property rights and independent brand strategy.

 

Our Service

1. Enquiries quickly reply within 24 hours.

 2. After-sales service, rapid response, the engineer installation guide. The feedback problems will be replied within 24 hours.If any problem, We will arrange professional engineers within 48 working hours to solve it.

3.We have  good faith principle.we will sure the products is high quality before shippment.