External Gear Slewing Bearing Turntables 06-0475-22

• Rolling Body：Ball Bearings
• The Number of Rows：Single
• Outer Dimension：200-6500mm
• Material：50mn, 42CrMo
• Spherical：Non-Aligning Bearings
• Load Direction：Axial

=== Base Info ===

• Model NO.：06-0475-22
• Separated：Unseparated
• Brand：Lyhy
• Custom Design：Available
• Company History：Since 1993
• Testing：in House or Third Party
• Transport Package：Wooden Box
• Specification：ISO2001: 9008
• Trademark：LYHY
• Origin：China
• HS Code：848210900
• Production Capacity：600PCS Per Year

=== Description ===

Basic Info.

Model NO. 06-0475-22 Separated Unseparated Brand Lyhy Custom Design Available Company History Since 1993 Testing in House or Third Party Transport Package Wooden Box Specification ISO2001: 9008 Trademark LYHY Origin China HS Code 848210900 Production Capacity 600PCS Per Year

Product Description

LYHY bearings is a professional manufacture of ball bearing, roller bearing, slewing bearing in china
Detailed specifications for the model: 06-0475-22
1. Type: Ball slewing bearing
2. Bore diameter: 383mm
3. Outside diameter: 589mm
4. Height: 75mm
5. Material: 42CrMo, 50Mn
6. Precision: P0. P6. P5.
7. Cage/retainer: Nylon or aluminum
8. Gear type: External gear
9. N. W. 62kgs




 Product description
LYHY Crane Slewing bearings can accommodate axial, radial and moment loads acting singly or in combination and in any direction. They are not mounted in housing or on a shaft, but directly to a seating surface. The inner and outer rings are supplied with mounting holes. Both rings may have integral gears. They are also referred to as slewing rings and tabletop bearings. Slewing ring bearings can perform oscillating (slewing) as well as rotating movements. They may be used without gears or with internal or external gears.
Slewing rings are usually used for low revolution while shaking and strained with an enormous axial force, moment and in some parts with radial force simultaneously.



 Structure
2.1 Slewing ring bearings have different types as per different structures:
Single row ball slewing bearings
Double row ball slewing bearings
Crossed roller slewing bearings
Triple row roller slewing bearings
Flange slewing bearings
2.2 The above slewing ring bearings can also be divided into three different types as per different transmissions:
Slewing ring bearings with no gear
Slewing ring bearings with external gear
Slewing ring bearings with internal gear


About LYHY bearings
1. Introduction: we are a manufacturer of slewing bearing since 1993; our factory occupies an area of 30000 square meters with 4 workshop and 1 office building.
2. Featured products: slewing bearing and slewing drive
3. Capital: Current is 1 million RMB, but we are increasing the capital to 10 million RMB
4. Workers: 40
5. Certificate: ISO9001:2008, 3.1 certificate, CCS certificate, Science and Technology Progress Award
6. Annual Exportation: 8million USD
7. Exported countries: (39)
Asia: India, Pakistan, Iran, Signore, Georgia, Malaysia, Vietnam, Thailand, Philippines, Israel, Korea, UAE, Sri Lanka, Saudi Arabia,
Europe: Turkey, Russia, Spain, Czech Republic, Italy, Poland, Slovakia, Bosnia and Herzegovina, Austria, France, Germany, Switzerland, Finland, Ukraine, UK
America: USA, Canada, Mexico, Brazil, Puerto Rico, Peru, Chile
Africa: South Africa, Egypt
Oceania: Australia

Packaging Details:
1. Bearing surface is covered with the anti-rust oil first; And then wrapped with the plastic film;
2. And then packed with Kraft paper and professional belts;
3. At last, with wooden box totally at the outer packing to invoid the rust or the moist;
4. We can depend on the customers demand to be packed;



Transportation:
All LYHY slewing ring bearings can be usually delivered timely, usual production time is 15-50 days based on different slew bearings diameters, sometimes slew rings will be in stock.
Slewing bearings can be offered different delivery terms, such as EXW, FOB, CIF, DDU and so on.
Also, slewing rings can be transported by different transport ways, by express (such as DHL, TNT, UPS, FEDEX and so on), by air, by sea, by truck, by railway and so on.


Slewing Ring Bearings------Applications:
Slewing ring bearings are widely used in industry and known as "the machine joints" Here under is the specific slewing bearing applications
1. Construction machinery (e.g. cranes, excavators, loader, scraper)
2. Metallurgical machinery (e.g. for steel plant)
3. Heavy machinery equipment (e.g. mining machinery, concrete machinery)
4. Marine machinery equipment (e.g. vessel, port hoisting machine, port oil transfer equipment, onshore and offshore crane)
5. Light machinery equipment (e.g. paper machine, plastic, rubber machine, weave machine)
6. Wind power generator
7. Packing machinery


INSTALLATION OF LYHY SLEWING BEARINGS

Preparation:
Make sure that the model is correct and slewing bearing isn't damaged during transportation.
2.  Check the appearance and rotational state of the bearing, such as rotational precision clearance, rotating flexibility, seals position, lubrication grease etc.
3.  The installation datum plane and bracket installing plane should be clean, grease, burr, paint and other foreign body should be wiped off.

Installation:

1. The screws in the installing plane should be fit with the mounting holes in the slewing bearing
2.  The slewing bearing has a soft zone marked with an "s" on the upper surface, when installing the bearing, it is important to ensure that this area is placed in a non-load or infrequent load zone.
3.  When the bearing is placed on the supporting frame work it is important to check the interface between these two surfaces. This check should be carried out with the insertion of feel gauges between the two surfaces. If a gap should exist then it is recommended to plane/resurface the effective area so as to remove the gap.
4.  Install slewing bearing with high strength screws, and choose appropriate strength bolts. All bolts are required to be tightened evenly. The sequence of this tightening process is shown in Pic. Welding of bearing is not allowed, in the event of welding any adjacent parts, heat transfer shall be avoided so as to cause the bearing to become deformed or change the hardness.
5.  After installation, the bearing should be rotated to check for smooth operation and any emission of unusual noise. If either of the aforementioned are noted, then the bearing should be adjusted to eliminate them. The teeth of the largest run-out are coated with green paint.

External Gear:
01 0181 02, 01 0235 00, 01 0289 06, 06 0307 00, 01 0342 00, 21 0411 01, 31 0411 01, 01 0422 01, 06 0400 00, 06 0475 22, 21 0541 01, 31 0541 01, 06 0508 00, 01 0555 01, 06 0574 09, 21 0641 01, 31 0641 01, 01 0626 00, 06 0675 00, 21 0741 01, 31 0741 01, 01 0765 01, 06 0734 00, 21 0841 01, 31 0841 01, 06 0823 18, 01 0880 00, 21 0941 01, 31 0941 01, 01 0947 00, 06 0980 09, 21 1091 01, 31 1091 01, 01 1050 00, 06 1116 00, 01 1180 00, 01 1295 01, 06 1250 21, 06 1390 03, 01 1410 00, 01 1595 00, 06 1595 04, 01 1712 00, 01 1845 02, 06 1790 09, 01 1895 00, 01 2040 03, 06 2002 00, 01 2202 00, 01 2130 00, 06 2242 00, 01 2560 01, 06 2500 01, 06 2810 09, 01 3031 00
Internal Gear
02 0245 00, 02 0308 01, 07 0380 01, 32 0411 01, 02 0422 01, 07 0489 11, 02 0520 00, 32 0541 01,
22 0541 01, 07 0573 00, 32 0641 01, 02 0626 01, 22 0641 01, 07 0673 00, 32 0741 01, 02 0720 02, 22 0741 01, 07 0770 00, 32 0841 01, 02 0820 00, 22 0841 01, 07 0849 00, 07 0885 01, 32 0941 01, 22 0941 01, 02 0935 00, 07 0946 05, 32 1091 01, 02 1050 00, 07 1075 01, 22 1091 01, 07 1140 13, 02 1225 00, 02 1292 00, 07 1304 04, 07 1385 03, 02 1415 00, 02 1565 02, 07 1606 02, 02 1715 00, 02 1805 02, 07 1830 04, 02 2040 00, 07 1997 04, 02 2022 00, 02 2202 00, 07 2400 00, 02 2560 00, 02 2618 00, 07 2810 09, 02 3074 01
Without Gear
03 0181 07, 03 0217 00, 08 0220 05, 03 0260 00, 08 0270 04, 08 0307 00, 08 0340 04, 03 0342 05,
03 0360 00, 08 0405 05, 03 0402 00, 33 0411 01, 08 0400 00, 23 0411 01, 08 0475 08, 33 0541 01,
03 0525 01, 23 0541 01, 08 0574 08, 03 0600 02, 33 0641 01, 23 0641 01, 33 0741 01, 08 0675 00,
08 0675 00, 23 0741 01, 03 0785 00, 33 0841 01, 23 0841 01, 08 0823 08, 33 0941 01, 23 0941 01,
03 0980 02, 08 0980 06, 33 1091 01, 23 1091 01

External Diameter	Internal Diameter	Height	Weight	Module	Gear No.	Model	*
244	125	25	5	2	120	01 0181 02	STD
318	169	45	14	3	104	01 0235 00	STD
379	210	45	20	4	92	01 0289 06	STD
403.5	234	55	25	4.5	88	06 0307 00	STD
440	265	50	28	4.5	95	01 0342 00	STD
505	304	56	32	5	99	21 0411 01	SL
505	342	56	32	5	99	31 0411 01	SLBP
529	323	54	45	5	103	01 0422 01	STD
535	305	75	61	8	65	06 0400 00	STD
589	383	75	62	5	116	06 0475 22	STD
640	434	56	44	6	105	21 0541 01	SL
640	472	56	46	6	105	31 0541 01	SLBP
654	390	85	98	8	80	06 0508 00	STD
689	455	74	89	6	112	01 0555 01	STD
700	479	77	85	6	114	06 0574 09	STD
742	534	56	52	6	122	21 0641 01	SL
742	572	56	55	6	122	31 0641 01	SLBP
774	516	82	118	8	94	01 0626 00	STD
816	573	90	129	6	132	06 0675 00	STD
840	634	56	60	6	138	21 0741 01	SL
840	672	56	62	6	138	31 0741 01	SLBP
863	679	82	102	6	142	01 0765 01	STD
886	610	85	155	8	108	06 0734 00	STD
950	734	56	68	8	117	21 0841 01	SL
950	772	56	71	8	117	31 0841 01	SLBP

FAQ:

Q: Are LYHY BEARINGS trading company or manufacturer?
A: LYHY BEARINGS is a professional manufacturer for slewing bearings, thin section bearings, ball bearings and rolling bearings

Q: How do LYHY BEARINGS control quality of their bearing?
A: LYHY BEARINGS has established strict quality control systems, all the products and services has passed ISO9001-2008 Quality Certificate and third party such as CCS, LR,ABS,BV


Q: What is the MOQ?
A: MOQ is 1pc, pls message us for detailed information.

Q: How about the package for LYHY bearings?
A: Standard Industrial packing in general condition (Plastic tube+ professional plastic belts+ plywood case). Accept design package when OEM.

Q: How long is the production time?
A: It takes about 7-40 days, depends on the model and quantity.

Q: How about the shipping?
A: We can arrange the shipment or you may have your own forwarder.

Q: Is sample available?
A: Yes, sample order is acceptable.

Q: Can we use our own LOGO or design on bearings?
A: Yes. OEM is acceptable for LYHY BEARINGS. We can design as per your requirements and use your own LOGO and package design.