Carbide Saw Blade Best Tool for Cutting Aluminum Plate 355-3.0-30mm-80t

Production Process

1.Sawing sticky aluminum?
Whether the installation of the saw blade is accurate and in place, and the tightness is moderate.
2.Aluminum cut card aluminum?
According to the specifications of cutting aluminum, whether the selected saw blade specifications and models are suitable.
3.sawing with burrs?
Saw and cut aluminum specifications, and whether the cutting speed set by the equipment processing is appropriate.
4.saw with scratches?
Whether the lubrication system of the aluminum cutting equipment is reasonable, good and effective.
5.Spray lubrication is not in place?
Whether the design of aluminum cutting equipment is professional and reasonable.
6.saw blade drop?
Adjust the quality of the lubricating oil and the injection position.
7.Saw blades are not durable?
The welding teeth of the saw blade are not strong or the material is not good.

Tips:Saw blade maintenance
If the saw blade is not used immediately, it should be placed flat or suspended using the inner hole. No other items or footsteps can be stacked on the flat saw blade, and attention should be paid to preventing moisture and rust.When the saw blade is no longer sharp and the cutting surface is rough, it must be re-sharpened in time. Grinding can not change the original angle, and destroy the dynamic level. Correction of the inner diameter of the saw blade, processing of positioning holes, etc., must be carried out by the manufacturer. If the processing is not good, it will affect the use effect of the product and may be dangerous. In principle, the reaming should not not exceed the original diameter of 20mm, so as not to affect the balance of stress.