SMD COB High Efficiency Solar Smart LED Street Light

• Light Source：LED Light
• Color Temperature(CCT)：Cool White
• Lamp Body Material：Aluminum Alloy
• Lamp Power：100W-300W
• Power Supply：AC
• Average Life：>50000h

=== Base Info ===

• Model NO.：SLR07
• Application：Highway, Square, Garden, City Road
• IP Rating：IP65
• Certification：CE, RoHS
• Voltage：100V-265V
• Freqency Range：50Hz-60Hz
• Power Factor：>0.95
• LED Chip：a Variety of Chips Can Be Selected
• System Light Effect：130-160 Lm,W
• Working Temperature：-22 Degrees Fahrenheit to +122 Degrees Fahrenheit
• Power Efficiency：>0.9
• LED Type：SMD
• Item：LED Street Light
• Warranty：5 Years
• Finishes：White,Black,Gray
• Specification：A variety of specifications can be selected
• Trademark：sunle
• Origin：Ningbo
• Production Capacity：10000 Pieces,Year

=== Description ===
         L(MM)W(MM)H(MM)Product size (R07-15)638371140Product size (R07-110)718371140Product size (R06-115)798371140Packing size  (R06-120)878371140Packing size  (R06-125)958371140Packing size  (R06-130)1038371140
Features
IP66 waterproof/dust proof/explosion proof/IK09.
Aluminum shape good at heat dissipation.
The lamp post can be adjusted to plus or minus 15 degrees ,It can also be installed vertically.
SMD 3030/ 5050/ Ra>70/SDCM<6.
100,000 times switching cycle before failure.
Total harmonic distortion(THD)<10%.
Excellent post light control design, the whole lamp can achieve T II-M, T III-M.
Pass 3G vibration test.
Application
Road lighting: It is mainly applied to the road lighting of urban expressway,secondary trunk road, branch road, factory, school, garden, various residential communities and courtyards. The installation height is 6-13m and the installation torque is 16Nm.
Matters needing attention
Before installing the lighting fixtures, please read this instruction manual carefully.
The lighting fixtures should be installed, connected and tested by a certified electrician based on the local regulations.
Lamps should always be installed or replaced carefully.
Please check the local voltage in accordance with the product requirements before installation.
Revamping only can be done when the power is off and the lamp is completely cooled down.
When clean the lamp, make the power off and let it cool down completely, clean the fixture with a soft cloth and a standard PH neutral detergent, stainless steel should be maintained regularly.
Don't cover the fixtures with flammable materials.
Replace should be made by the manufacturer or his service agent or certified electrician in order to avoid a hazard.