High Temperature Resist Food Grade PTFE Belt for Dryer Machine for Fruits, Vegetables

• Type：Conveyor Belt
• Material：PTFE
• Inside Material：Fiberglass
• Feature：Oil-Resistant, Acid And Alkali Resistant, Tear-Resistant, Heat-Resistant, Cold-Resistant, Wear-Resistant
• Tensile Strength：Strong
• Product Name：PTFE Belt for Dryer Machine

=== Base Info ===

• Mesh Size：1*1mm, 2*2.5mm, 4*4mm
• Advantage：Heat Resistance, Easy Cleaning
• Temperature：+300c
• Transport Package：as Per Customer Request
• Specification：SGS,CE,FDA,ISO
• Trademark：Youngsun
• Origin：Jiangsu Taixing
• HS Code：70195900
• Production Capacity：30000 Square Meter ,Month

=== Description ===

Basic Info.

Mesh Size 1*1mm, 2*2.5mm, 4*4mm Advantage Heat Resistance, Easy Cleaning Temperature +300c Transport Package as Per Customer Request Specification SGS/CE/FDA/ISO Trademark Youngsun Origin Jiangsu Taixing HS Code 70195900 Production Capacity 30000 Square Meter /Month

Product Description

PTFE dry machine belt is ideally suited for conveying products within highly efficient air distribution systems allowing optimised moisture removal to take place and is commonly used within ultra violet and infra red dryer units
The open area allows maximum air flow optimising drying times whilst its extreme properties make it a natural choice for dryer manufactures.

Applications of PTFE belt for dryer machine:
PTFE Coated Fiberglass Mesh Conveyor Belts are used in applications such as the drying of printed products for example; Point of display stands, T-shirts, glass and mass produced paper prints. Print dryers usually opt for Ultra violet, Infra red or hot air as the heat source to dry.

Other applications range from the drying of cereals, non woven's, charcoal interlinings, carpet & carpet tiles, printed circuit boards and shrink-wrap tunnels but to name a few.

Features & Benefits
PTFE dryer machine belt is light weight and cost effective therefore is easy to handle and less expensive than wire alternatives that can be difficult to replace. Often supplied with a metallic clipper type fastener these style of belts can easily be removed and replaced therefore minimising downtime and saving money. This material can be offered in carbon loaded black therefore providing antistatic properties.

Material Properties
· Temperature resistance: -70° C up to plus 260° C

· Chemical Inertness

· Ultraviolet, Infra-red, microwave, radio frequency resistance

· Non-Stick surface

· Lightweight and energy efficiency for economical operation

Additional Information
4X4 open area mesh is available in widths up to 4000mm wide and can be supplied at any length required. In addition film, glass or kevlar can be applied as edge reinforcement depending of the environment it will be used within. There are various methods of joining screen-printing belts however the metallic clipper or spiral types are more typical

Model	Mesh Size	Material	Thickness	Weight	Temp Resistance	Max Width	Tensile Strength
YS-6001	1x1mm	fiberglass	0.5mm	370g/m²	-70-320C	4000mm	310/290N/cm
YS-6002	2x2mm	fiberglass	0.7mm	450g/m²	-70-320C	4000mm	350/310N/cm
YS-6003	4x4mm	fiberglass	1.0mm	400g/m²	-70-320C	4000mm	390/320N/cm
YS-6004	4x4mm	fiberglass	1.0mm	450g/m²	-70-320C	4000mm	390/320N/cm
YS-6007	4x4mm	fiberglass +kevlar	1.2mm	600g/m²	-70-320C	4000mm	895/370N/cm
YS-6008	4x4mm	fiberglass	1.0mm	500g/m²	-70-320C	4000mm	395/370N/cm
YS-6010	4x4mm	Kevlar	1.0mm	500g/m²	-70-320C	4000mm	900/600N/cm
YS-6012	4x4mm	fiberglass	1.0mm	550g/m²	-70-320C	4000mm	395/370N/cm
YS-6013	10x10mm	fiberglass	1.2mm	450g/m²	-70-320C	4000mm	360/300N/cm
YS-6014	0.5x1mm	fiberglass	0.5mm	420g/m²	-70-320C	4000mm	310/290N/cm
YS-6015	2x2.5mm	fiberglass	0.9mm	600g/m²	-70-320C	3000mm	390/320N/cm