Dental Microscope Surgical Digital Microscope Medical Device Medical Microscope with Video & Camera

• Applicable Departments：Orthodontic Department
• Certification：UL, CE
• Material：Metal
• Object Lens：0.5X, F=250mm
• Mechanical Arm：Down-240mm Middle- 450mm up 230mm
• Adjustment Range：50mm-75mm

=== Base Info ===

• Model NO.：Electric product
• Transport Package：Box
• Trademark：T-med
• Origin：China
• HS Code：90184100
• Production Capacity：300,Month

=== Description ===

Basic Info.

Model NO. Electric product Transport Package Box Trademark T-med Origin China HS Code 90184100 Production Capacity 300/Month

Product Description

Product Description

Surgical Dental Digital Microscope 

Technicals:

No	Dubleey epiece tube	Pupildistance adjustment rang :55mm-80mm
1	Eyepiece	Field of vision adjustment :±7D
2	Big objective lens	F=250mm
3	Object diameter	LED light source>45,000LX
3	View diameter	10mm-100mm
4	Spot diameter	90mm
5	Balance arm	Down:240mm,Middle:450mm,Up:230mm
6	Microscope light source	Balance the light source
7	Maximum resolution	1920*1080P
8	Camera shooting	Extraposition2.5X~25X

Part names and function

 

1. Camera

•  Preparation for use
•  Plug in the HDMI cable and DC power respectively. The LED lights red, indicating that the camera is powered.
• Short press the switch button, LED light turns from red to orange, indicating that the camera starts normally.

1.  If you are connected to a computer, you only need to insert a USB cable to connect to your computer.
2.  Power on/off:

• Power on, long press ON/OFF.
• Power off,short pree ON/OFF.

1. Electronic zoom in and out:

• Press the UP button and the image will be electronically magnified and the electronic magnification will be displayed on the left side of the image. Up to 5 times the electronic magnification is supported.

1. After electronic zooming in, pressing DOWN will electronically zoom out and display the current electronic magnification on the left side of the image until the original size of the image is restored.
2.  Switch photo/video mode:

• The system defaults to the camera mode. Press OK at this time to take a photo.

Press the MODEL mode button to switch to the recording mode, then press the OK button to start recording, and press the OK button again to stop recording. 


Configuration list
 

Part Name	Quantity
Microscope body	1
Eyepiece	2
Camera	1
Adapter	1
0.5 Object lens	1
Handle	2
Light Source	1
Bracket	1
Mechanical arm	1
Fixture	1
USB cable	1
Power cord	2

 

• Maintenance

• All lenses should be kept clean. If there is any fine dust, blow it off with a blower or gently wipe off the cotton yarn. If there are traces of oil and fingers, use a small amount of cotton yarn with a 3:7 ratio of ethyl alcohol and ether to gently wipe off.
• Do not use organic solvents to wipe the surface of the microscope, especially the surface of plastics, and use neutral detergents for cleaning.
•  Do not disassemble the microscope by yourself so as not to affect the performance of the microscope
•  Do not touch dust, cover it with a dust cover, store it in a place away from moisture, so as not to rust or mold, when the microscope is not in use.
•  To maintain the performance of the microscope, regular inspections are recommended.

Instruction:
1.Please notice that check product appearance if it is obviously deformative or attached foreign matters.
2.It must be kept in high temperature autoclavable sterilizer with 15 mins , and then dried for 30 mins.
3.put the stripper in coreect way with contra angle /manual grip .
4.the stripper will be placed on the interproximal teeth lightly stroke to cut and grind
5. in operation , if the stripper was broken or droped at ground, should replace a new one  in time .
6.After operation , the stripper should be cleaned up completely and put in dry conditions.




Picture:











About us: