Dental Hanging Light for Specialty Dental Clinic

Ningbo Passen Pack Co., Ltd. / 2022-06-09

Teeth Whitening Method：Cold Light Whitening
Applicable Departments：Oral Surgery
Certification：ISO, CE
Type：Oral Light
Transport Package：Carton
Trademark：foinoe

=== Base Info ===

Model NO.：Alien-VII
Origin：China
Production Capacity：5000000pieces,Month

=== Description ===
Storage and transportation environmentAmbient temperature-10°C~+40°CTransport temperature-30°C~+60°CRelative humidity30%~85%Relative humidity10%~95%Atmospheric pressure30~75KpaAtmospheric pressure50~106Kpa
Technical Parameters

Input Voltage	AC/ DC12- 24V
Power	4VA
0.7m illuminance value	20000 Lux
Color temperature	5000K
Color rendering index	90
Net weight	1. 3kg
Gross weight	2. 0kg

Instructions
1. Opening and closing operation: After power-on, push the "toggle switch" on the back to turn on the light or the front of the hand to slide the sensing area to turn on the light.
2. Adjust the brightness operation:
toggle switch dimming toggle switch handle for 1-2 seconds, start the stepless dimming function, when the
brightness is adjusted to the maximum or minimum height, "beep" sound
prompts, if you continue to keep the toggle state , the reverse dimming will be started, and the same brightness will be triggered to the limit brightness, and the appropriate brightness can be released to release the toggle switch.
Induction dimming palm stays in the sensing area for 1-2 seconds, starts the dimming mode, accompanied by a "beep" sound prompt, indicating that the maximum or minimum brightness has been reached. If you continue to keep the palm in the sensing area, immediately start the reverse. Dimming, to achieve the right brightness, let go.
3. Turn on/off the anti-cure mode: the front silver anti-cure switch button slides up to switch to the anti-cure lighting mode. In this case, the blue component of the light is filtered out and the composite material can be used for a long time. Perform processing and slide down to normal operation mode.
4. The product has a brightness memory function, which will enable the brightness of the last off when it is turned on to work.
5. Both sides of the outer handle, press the top of the Bowen button to pull out, the handle can be removed, easy to clean and disinfect.

Maintenance and precautions
1. Non-mirror area cleaning can be carried out with three gun gas, or it can be cleaned with soft cotton flannel or wet paper towel;
2. The reflective cup can be cleaned with glasses cloth (to disable rough
feeding to prevent scratching the surface).

Note: All surfaces of the lamp should not be wiped clean with corrosive liquids!
Dental Hanging Light for Specialty Dental Clinic