Laboratory Supply Consumable Microtube PCR Racks (60-0056)

• Type：General Lab Supplies
• Material：Plastic
• Ethylene Oxide Sterilization：Ethylene Oxide Sterilization
• Quality Guarantee Period：5 Years
• Group：Adult
• Logo Printing：With Logo Printing

=== Base Info ===

• Model NO.：60-0056,0082,0088
• Brand：Biologix
• Color：Clear
• Skirted：Half
• Rnase：Free
• Dnase：Free
• Transport Package：25,Pack, 100,Case
• Specification：CE FDA ISO
• Trademark：Biologix
• Origin：Changzhou, Jiangsu, China
• HS Code：39172200
• Production Capacity：200cases,Month

=== Description ===

Basic Info.

Model NO. 60-0056/0082/0088 Brand Biologix Color Clear Skirted Half Rnase Free Dnase Free Transport Package 25/Pack, 100/Case Specification CE FDA ISO Trademark Biologix Origin Changzhou, Jiangsu, China HS Code 39172200 Production Capacity 200cases/Month

Product Description

*Certified RNase & DNase and Endotoxin Free on a lot by lot basis for highest sample integrity
*Temperature range: Stable from -20º C to 100º C
*Tested to withstand centrifugation of 6, 000 RCF in a fully supported rotor
*Compatible with most popular 96-well thermal cyclers
*Made from 100% pure virgin polypropylene



*Ultra*Ultra-thin walls of uniform thickness - accelerate heat transfer leading to shorter cycle times and more consistent results.
*Alphanumeric well coding available to further assist in sample storage and organization
*Clear well bottom for sample visibility
*The half-skirted plate provides superior rigidity and is easy to insert and extract
*The plate has a working volume of 0.2ml per well.
*See PCR Plate compatibility on page 16.

-thin walls of uniform thickness - accelerate heat transfer leading to shorter cycle times and more consistent results.
*Alphanumeric well coding available to further assist in sample storage and organization
*Clear well bottom for sample visibility
*The half-skirted plate provides superior rigidity and is easy to insert and extract
*The plate has a working volume of 0.2ml per well.
*See PCR Plate compatibility on page 16.

Catalog#	Well	Skirt	Color	Sterile	Unit
60-0056	96-well	Half-Skirted	Clear	No	25/pack, 100/case
60-0156	96-well	Half-Skirted	Pink	No	25/pack, 100/case
60-0256	96-well	Half-Skirted	Green	No	25/pack, 100/case
60-0356	96-well	Half-Skirted	Blue	No	25/pack,100/case
60-0456	96-well	Half-Skirted	Yellow	No	25/pack,100/case
60-0016	96-well	Non-Skirted	Clear	No	25/pack, 100/case
60-0116	96-well	Non-Skirted	Pink	No	25/pack, 100/case
60-0216	96-well	Non-Skirted	Green	No	25/pack, 100/case
60-0316	96-well	Non-Skirted	Blue	No	25/pack,100/case
60-0416	96-well	Non-Skirted	Yellow	No	25/pack,100/case

1. What are the main factors that influence the maximum centrifugal acceleration force?

Use of organic solutions, temperature below 0°C, centrifuging without centrifuge adapter, etc. Conduct a trial run to determine proper conditions before any critical use begins.
The RCF (relative centrifugal force) or G ratings for our disposable centrifuge tubes have been established at room temperature using tubes filled to nominal capacity with water and centrifuging for 30 minutes. recommended carriers, adapters, and cushions that fully support the tubes. If an angle head rotor is used or proper support is not provided, G values will be lower.
Do not confuse speed or revolutions per minute (RPM) with relative centrifugal force (RCF). Instructions for centrifuging a sample at a given RPM and time are incomplete unless the rotor or radius is specified. Protocols should always state the time and RCF value for centrifuging a sample.

1. What are autoclaving guidelines of plastics?

To ensure successful steam sterilization of your plastic labware please adhere to the following guidelines: PLEASE NOTE THAT NOT ALL PRODUCTS ARE AUTOCLAVABLE. Autoclave plastic consumables at 121°C and 15psi/1 atm for 15 minutes. Do not use a dry cycle, as this may cause deformation or weakening of the plastic. Allow temperature within the autoclave to return to 80°C or below before removing products.
3.What are Biologix's Commitments to Quality?
We look at quality from every angle in terms of functionality, safety, purity, formulation, consistency, manufacturing, customer service, technical support, and much more. According to the detailed QA/QC procedures for our manufacturing facility, each and every product is traceable by lot, regardless of packaging format. Products must go through a five-step human inspection before being released for packaging. Biologix applies the most stringent standards to certify that products are free from RNase, DNase, endotoxin (pyrogens), etc. In addition to being ISO 9001:2008, CE compliant, we also make available to our customers lot-specific certificates such as Sterilization Certificates, Nuclease Free Certificates, Certificates of Origin, etc.