High Efficient Low Radistion Dental Mobile X Ray Machine

• Type：X-Ray Equipment
• Material：Metal
• Location Mode：Mobile
• Color：Green and White
• Stype：Modern
• Tube Voltage：60kv

=== Base Info ===

• Model NO.：ADS-M1
• Tube Current：8mA
• Focus Size：0.8mm
• Total Filtration：2.5mmal
• Exposure Time：0.2-4s
• Leak Radiation：Outside One Meter≦0.002mgy,H
• National Standard：0.25mgy,H
• Package Size：143*57*26 Cm
• Gross Weight：47kg
• Transport Package：Box
• Specification：143× 57× 26 cm
• Origin：China
• HS Code：9018499000
• Production Capacity：5000pieces,Year

=== Description ===
SpecificationsPower supply:220V±10%,60HZ,1KVATube voltage60KVTube current8mAFocus size0.8mm Total filtration2.5mmALExposure time0.2-4sLeak radiation:outside one meter<=0.002mGy/h,(national standard:0.25mGy/h)Package size:143*57*26(cm)Gross weight:47kg

Precautions
1. In order to operate safe, must be installed properly good ground.
2. X-ray machine due to small thermal capacity is limited, should pay attention to intermittent operation is recommended.
3. The machine only during exposure, will produce X-rays, power-off state does not produce X-rays, as long as it does not produce radiation exposure is not under power on state.
4. The machine is in the correct use, any unforeseen circumstances, please immediately cut off the power operator, discontinue use. After the aircraft maintenance standards, it can be used again.
Additional filtration plate 5. The machine factory, each X-ray device is equipped with the following specifications: 1.0 / 0.5mm aluminum each one.
6. When disassembling the machine each time, first disassemble the nose and then split the other member.
8. After each use the machine, arm recovery highest point, the position of the head is placed equilibrium position.
9. After each use of medical alcohol exposure in some patients with end beam tube disinfection, cleaning.
10. The weekly machine surface with a dry cloth to clean, inspect each connector contact.
11. Note that the machine maintenance and inspection indicator that shows whether the knobs, switches, remote control is working properly; X-ray source assembly if possible oil leakage; when the X-ray source assemblies exposure, abnormal noise; mechanical portions of the fastening screws loosening the like.
12. The machine rated capacity of 1.1kW, please use the greater than 1.5kW power supply capacity or grid. If the regional grid voltage is not normal, we recommend supporting more than 1.5KW industrial regulator, to prevent damage to the machine voltage is not normal, reducing machine life.