Nano Hybrid Light Cure Composite Kit of Dental Material

• Usage：Filling Material
• Usage Times：Non-Disposable
• Material：Pasted
• Applicable Departments：Dental Department
• Nature：Specialized Instrument Equipment
• Certification：CE

=== Base Info ===

• Model NO.：ADS-KIT1
• Dentin Color：A1,A2,A3,A3.5,B1
• Light Cure Composite：4G, Syringe*5
• Total Etching Adhesive：5ml, Bottle*1
• Syringe Needles：5PCS, Box*1
• Applicators Brushes：20PCS,Box*1
• Transport Package：Box Packing
• Trademark：DENTEX
• Origin：China
• HS Code：3006400000

=== Description ===

Basic Info.

Model NO. ADS-KIT1 Dentin Color A1,A2,A3,A3.5,B1 Light Cure Composite 4G/ Syringe*5 Total Etching Adhesive 5ml/ Bottle*1 Syringe Needles 5PCS/ Box*1 Applicators Brushes 20PCS/Box*1 Transport Package Box Packing Trademark DENTEX Origin China HS Code 3006400000

Product Description

Nano Hybrid Light Cure Composite Kit of  dental material
 Indication for use: • All class of direct restoration for anterior and posterior. • Indirect restoration such as veneer, inlay and onlay. • Core buildups.
 Advantages: 1. Solution of simplicity with universal shade    The shade of DX.Universal composite matches with VITA CLASSIC shade guide. Therefore    mono shade restoration can be applied as conventional & ordinary solution.
2. Nano hybrid technology
      DX. Universal composite is applying unique nano hybrid dispersion technology to maximize   the load of fillers by controlling the size and distribution of particles. It dramatically increased   composite's physical properties and notably improved the smooth surface of restoration in   comparison with traditional micro hybrid or hybrid composite   3. Other advantages• High radiopaque. • Fluoride releasing to prevent recurrent caries. • Excellent handling.

  Package:

REFILL:
Light Cure Composite: 4g/Syringe*5
Total Etching Adhesive: 5ml/Bottle*1
Etching Gel: 2.5ml/Syringe*1
Syringe Needles : 5pcs/ box*1
Applicators Brushes: 20pcs/box*1
Net weight:188.4g
COLOR: A1,A2,A3,A3.5,B1

Description of Dental Light Cure Composite Kit:

(1)Preparation: isolate and prepare tooth.
(2)Cleaning: rinse the preparation with water.
(3)Drying: gently air dry until there is no visible water.Do not allow enamel or dentin to dry for an excessive period of time.
(4)Applying Dentex Self-Etching Light Cure Adhesive (DSA): 
dispense 1-2 drops of DSA into a mixing well, apply enough DSA to the entire preparation with a little brush until a shiny surface is achieved and then wait for 10 seconds (DSA should not be applied too much ). Use a gentle stream of air to evaporate the solvent for 5 seconds. (If using a non self-etching adhesive, an etching step should be used according to the manufacturer's instruction).
(5)Cure: light cure for 20 seconds at 500±50mW/cm2. Keep the distance to exposure surface less than 4 mm.
(6)Applying Dentex light cure composite (DLC): place selected DLC into

cavity preparation following by light cure. According to following table, the curing time is recommended for different depth and color shades. In order to reduce shrinkage stress, for a large cavity, an increment filling is recommended. In general, 1-2 mm increments are placed into cavity preparation from different sides and the restoration is built incrementally. Each increment is light cured for 30 seconds.
(7)  Finishing: after light cure, adjust restoration.
(8)  Polishing: use polishing strip or disc to polish the surface