High Quality O-Belt Roller

• Material：Steel Z,P, SUS
• Surface Treatment：with Rubber,Galvanized Steel
• Installation：Spring Load,Female Thread,Flat Milling
• Tube Dia：38,50,60,
• Shfat Dia：10,12,15
• Length：100-1800mm

=== Base Info ===

• Model NO.：62R
• 10 Shaft：M6
• 12 Shaft：M8
• 15 Shfat：M10
• Transport Package：Standard Export Package
• Specification：ISO 9001
• Trademark：JiuTong
• Origin：Huzhou, Zhejiang, China
• Production Capacity：50, 000 PCS Per Month

=== Description ===

Basic Info.

Model NO. 62R 10 Shaft M6 12 Shaft M8 15 Shfat M10 Transport Package Standard Export Package Specification ISO 9001 Trademark JiuTong Origin Huzhou, Zhejiang, China Production Capacity 50, 000 PCS Per Month

Product Description

Product Features:

1. Compared with chain drive, belt drive has the advantage of high speed and low noise, "O-belt" is the most popular way of belt drive.

2.  Roller is driven by the friction of the "O-belt"in the groove of roller, to avoid the damge of the static to the goods(e.g. CMOS clip in the electronic industry). Anti-static design has already been the standard configuration of this product.

3. Except standard type, the position and number of grooves could be customized(4 or more grooves on one roller is not recommended)

4. The load capacity of roller depends on the driving power of "O-belt" and the transmission structure(line shaft drive is higher than hook-ups). Reference data is normally less than 300N.

5. Precision ball bearing and polymer bearing housing , end cap form the bearing unit which is very important. It is not only for good looking but also further more for the smooth and quiet running.

6.  The end cap of roller resists dust and water splash well in operation environment.

7. Suitable in high speed application. Speed could vary according to diameter and length of roller,  Max.Speed up to 120m/min.

8. Work temperature rang: 0 to +40