CE Compliance Fully Undershot Spraying and Baking Cabin for Auto

• Type：Spray Booth
• Certification：CE
• Substrate：Steel
• Coating：Powder Coating
• Airflow Direction：Fully Undershot-type
• Heating Mode：Diesel

=== Base Info ===

• Model NO.：IT-L8
• Paint Mist Treatment：Dry-type
• Condition：New
• Plenum (Height)：600mm
• Extraction：350mm
• Extraction Area：32m2
• Grids Carrying Capacity：900kg,Wheel
• Walls：60mm Rock Wool Walls
• Brightness：>1,500lux
• Air Volume：35,000m3,H
• Empty Loaded Air Speed：0.30m,S
• Heats：Direct Gas Fired Heating System
• Maximum Working Temperature：80 Celsius
• Inverter：Schneider
• Noise：<78 dB
• Warranty：2 Years
• Stack Light：Yes
• Transport Package：Cargo Loaded on Steel Frame Handled by Forklifts
• Specification：8000 X 4000 X 3000mm (L X W X H)
• Trademark：INFITECH
• Origin：Guangzhou, China
• HS Code：8419899090
• Production Capacity：1000 Sets,Year

=== Description ===
PAINT BOOTHITEMSSPECIFICATIONSModelIT-SUPER-L8 Paint Booth for Car RefinishingDesign standardBS EN 13355: 2004+A1:2009
BS EN 60204: 2006+A1:2009Internal dimensions 8000 X 4000 X 3000mm (L X W X H)External dimensions8110 X 5760 X 4010mm (L X W X H)AirflowFull DowndraftPlenum (height)600mmExtractionThrough 350mm high raised basementExtraction area32m²Grids carrying capacity900kg/wheelInternal rampPneumatic ramp, 1 setEntrance door3400x3250mm (WxH), 1 setService door840x2250mm(WxH), 2 setsWalls60mm rock wool walls, 1.0mm substrateCeiling lights (LED)10 sets, each 6 X 18W, 1,080W totalSidewall lights (LED)14 sets, each 3 X 12W, 504W totalBrightness>1,500LUXFiltersBag filter, high efficiency ceiling filter, floor filter, exhaust filterIntake/Exhaust unitDirect-type turbine fan, 2x11KW, SIEMENS motorAir volume35,000m³/hEmpty loaded air speed0.30m/sHeatsDirect gas fired heating system, ECLIPSE burnerMaximum working temperature 80ºCControlsCE standard control boxInverter SCHNEIDER inverterStack light YesRated power28KW PREP STATIONITEMSSPECIFICATIONSModelCar Prep StationDesign standardBS EN 13355: 2004 + A1: 2009
BS EN 60204: 2006 + A1: 2009Internal dimensions6850×4000×3350mm (L×W×H)External dimensions8110×4075×4010mm (L×W×H)Rear wall50mm rock wool panelsPlenumWith plenum, 600mm(H)Exhaust plenum chambers4000*660*800mmFilter areas3.2m²Front door3700x3000mm, 1 set, electric soft curtain doorDivider door5800x3000mm, 1 set, electric soft curtain doorCeiling lighting8 sets, each 4 X 18W, 576W totalBrightness> 700LuxExhaust system1×5.5KW, 970RPM, 380V, 50HZ, SIEMENS motorAir volume18,000m³/h, 650paFiltersHigh efficiency ceiling filter, pleated andreae filters + fiberglass filter, exhaust filterControlsSoft start, emergency stop switch, lighting,
failure indicationElectrical & Tool cabinetsYes.Special itemRated power: 10KW
3.DETAILS
AIRFLOW & BOOTH STRUCTURE (PAINT BOOTH)
1.600mm plenum    The plenum comes with diffuser unit, providing the assistance to reduce air speed before air flows to the plenum, which helps achieve even air distribution.
2.Vertical walls.
3.Raised basementThe air flows vertically from the plenum to the workspace, and extracted through raised basement. In the basement, there is also diffuser to for adjusting airflow speed, so the air can be balanced from one end to the other end.

DOORS & LIGHTS

• 2+2 structure entry door: 3400x3250mm
• Service door with full size tempered glass observation window
• Inclined ceiling and horizontal sidewall lights

• Non-spark fan & SIEMENS motor
• Cycle damper (for spraying and baking phase)
• Direct gas fired heating unit, Eclipse direct fired burner

1. 97% efficiency
2. Accurate temperature control

• Basic functions: spraying, heating spraying, flash, baking, cooling
• Safety functions: emergency stop, over-heat alarm, failure alarm, fans interlock with heating system
• SCHNEIDER inverter control

• Traditional control panel with manual buttons
• Automatic pressure adjustment

• The servo of central dust extraction unit can be integrated in the control panel