New Design 7 Stages Trickle Pulse Repair Gel Std AGM Lead-Acid Battery Charger Maintainer

Dongguan Yilin Paper Co, . Ltd. / 2022-06-23

New Design 7 Stages Trickle Pulse Repair Gel Std AGM Lead-Acid Battery Charger Maintainer

  • Warranty:12 Months
  • Certification:GS, CE
  • Color:Customized
  • Customized:Customized
  • Material:ABS, ABS
  • Type:Jump Start

=== Base Info ===

  • Model NO.:BL-BC-0040
  • Charging Time:4-6hours
  • Output Voltage:DC12V
  • USB Output:5V,2A 5V,2A
  • Output Power:20W
  • AC Input Frequency:50-60Hz
  • Output Voltage and Current:12V,0.5A, 12V,1A
  • Transport Package:CTN
  • Specification:L14.5*W10CM
  • Origin:China
  • Production Capacity:10000

=== Description ===

Basic Info.

Model NO. BL-BC-0040 Charging Time 4-6hours Output Voltage DC12V USB Output 5V/2A 5V/2A Output Power 20W AC Input Frequency 50-60Hz Output Voltage and Current 12V/0.5A, 12V/1A Transport Package CTN Specification L14.5*W10CM Origin China Production Capacity 10000

Product Description

New Design 7 Stages Trickle Pulse Repair Gel Std AGM Lead-Acid Battery Charger MaintainerNew Design 7 Stages Trickle Pulse Repair Gel Std AGM Lead-Acid Battery Charger MaintainerDescription of 12V 0.5/1A Lead Acid Intelligent Smart Car Battery Desulfator Maintainer ♦ 90% high conversion efficiency was designed and developed based on battery characteristics by our company. ♦ Smart seven-phase charging mode makes it charge quickly. ♦ It has the function of reverse connect protection and short circuit protection. ♦ The product is applicable to 12V lead acid battery/AGM/GEL/EFB/STD battery. Product Feature of 12V 0.5/1A Lead Acid Smart Car Battery Desulfator Maintainer 1. Max charging current: 1A 2. Rated input voltage(AC): 100-240V 3. Material: ABS case 4. Applicable for Lead-acid/GEL/AGM/EFB/STD battery 5. This charger micro controller MCU intelligent control and management of battery charging process,the battery is full automatically stop charging. 6. With high temperature, short circuit, overcharge, over voltage and reverse polarity protection and other functions. 7. Battery Maintainer: Trickle charger, maintain your battery.New Design 7 Stages Trickle Pulse Repair Gel Std AGM Lead-Acid Battery Charger MaintainerNew Design 7 Stages Trickle Pulse Repair Gel Std AGM Lead-Acid Battery Charger MaintainerNew Design 7 Stages Trickle Pulse Repair Gel Std AGM Lead-Acid Battery Charger Maintainer= 4-IN-1 Combination =POWRUN PJS06 600 is a perfect combination of:1.A 600A Peak Current Jump Starter;2.A 12000mAh Power Bank;3.An LED Flashlight. 4.A Voltage Detector It can get you well-prepared for natural disaster emergencies, outdoor activities, motoring life, and daily uses etc., no matter the temperature is high or low. = 600A Peak Current, Boost in No Seconds = Peak Current: When the jump starter is initially turned on, current rushes into the car battery, going from zero and rising rapidly to reach the maximum power, known as the Peak Amp or Peak Current.The higher the peak current, the more powerful the jump starter. Despite the POWRUN PJS06 is small enough to fit in your glove box, it is powerful enough to jolt your car back to life. With its powerful 600A peak current, it can easily restart 4.5L gasoline cars and 2.5L diesel cars in seconds for up to 50 times on a single charge, without waiting on the roadside for help.  =12000mAh Power Bank, Not just a Jump Starter = POWRUN PJS06 600 can also work as a compact portable power source for output of: 5V/2.1A (max)USB;Which means you can use it to recharge all your USB devices with 50%~75% faster speed than conventional charging, and power 12-volt devices (Air Compressor, GPS, Car Refrigerator, Vehicle Vacuum Cleaner, and Vehicle Air Purifier, etc.) on a daily basis.  = 3 LED Illumination Modes, Peace of Mind in a Box = The ultra-bright LED flash light has 3 illumination modes: 1.A flash light when you're in the dark; 2.A strobe light to attract attention; 3.An SOS signal flash, that will last up to 168 hours on a full charge, for when you're outdoors and in need of emergency help. Also, The LCD screen shows exactly the remaining power and output voltage, which helps you make better use of the power and protect your devices.
New Design 7 Stages Trickle Pulse Repair Gel Std AGM Lead-Acid Battery Charger MaintainerNew Design 7 Stages Trickle Pulse Repair Gel Std AGM Lead-Acid Battery Charger MaintainerNew Design 7 Stages Trickle Pulse Repair Gel Std AGM Lead-Acid Battery Charger Maintainer
New Design 7 Stages Trickle Pulse Repair Gel Std AGM Lead-Acid Battery Charger Maintainer
= Easy 4 Steps, Ready and Go! =  1.Connect the battery clamp cable to the jump starter 2.Correctly clip the red and black clamps to the vehicle battery terminals (red to positive, and black to negative); the green light will turned on being ready for jump starting 3.Start the vehicle 4.When the vehicle is started, disconnect the clamps from vehicle batteryNew Design 7 Stages Trickle Pulse Repair Gel Std AGM Lead-Acid Battery Charger MaintainerNew Design 7 Stages Trickle Pulse Repair Gel Std AGM Lead-Acid Battery Charger Maintainer

Copyright 2024 357th.com All Rights Reserved