PU Conveyor Belt Matt Finishing Anti-Static Fabric 1.3mm 2ply

• Material：PU
• Inside Material：Fabric
• Feature：Oil-Resistant, Acid And Alkali Resistant, Tear-Resistant, Wear-Resistant
• Tensile Strength：Strong
• Color：White
• Surface Coating Material：TPU

=== Base Info ===

• Model NO.：HU13-21A
• Surface Coating Pattern：Matt, Glossy
• Bottom Coating Pattern：Polyester Fabric
• Ply：2
• Weft：Rigid
• Tension 1% Elongation：8n,mm
• Min.Pulley Diameter：15mm
• Max Production Width：4000mm
• Working Temperature Range：-15~+90 Degrees
• Transportation Style：Roller, U Type, Slat
• Characteristics：Anti-Static
• Top Coating Hardness：86-92 Shorea
• Belt Property：Oil Resistant
• FDA：Yes
• Transport Package：Export Standard
• Specification：Thickness: 1.3mm
• Trademark：UNI Belting
• Origin：Shanghai China
• HS Code：59100000
• Production Capacity：200000000 Square Meters

=== Description ===
Yes

With our experienced and skilled personnel, UNI belting have the depth of technical knowledge required to solve even the most complex of your belting problems.

We produce a wide range of both thermoplastic and thermoset materials that meet even the most stringent industry standards, both for direct contact as well as for packed product conveying. For the food industry, we manufacture belts for use with high or low temperatures  with excellent resistance to oils and fats and superb release characteristics for multiple markets.

UNI Belting fabricates thermoplastic belting that can be provided with numerous accessories for better incline possibilities, spilling of product, belt tracking, etc.

The larger part of our cleats and guides are extruded materials of a superior blend of raw materials specifically formulated to match belt covers. Special care is taken for a constant and superior quality.

All cleats, both extruded and fabric-reinforced, are designed to carry weight and stay upright. With bigger loads, we envisage maximum flexibility with greater mechanical strength.






RECOMMENDATIONS FOR USING, INSTALLATION, STORAGE AND MAINTENANCE OF BELTS:
Storage
Recommendations:
- Belts are stored in their original packing until they are installed.
- Belts of large length or width are desirable to hang or place on a flat surface.
- Belts' protection from the low temperatures and the sunlight is necessary.
- If the storage conditions are very different from the working conditions, it is recommended to wait at least 12 hours under normal operating temperature before installation.
Before installation
Before installation it is recommended to clean the conveyor.
Replacing the old belts allow the maintenance of the other conveyor components.
- Clean the shafts and the belt supports.
- Check the position of drums and shafts. If it is necessary align them.
- Install tension devices to the minimum position.
- Check the drive drum cover or replace it.
Installation
Install the belt on the conveyor. Please note: on the belt should not be any folds and creases.
Tension
Tighten the belt so that there is no slippage of the drive drum with a full load and before work start.
Maintenance
Properly selected belts are stable and resistant to the transported products.
Belts do not have any extraneous odors, do not start staining the products and do not affect the quality of the products.
Belts are easy to clean with water and neutral washing detergents.
To prevent belt's slipping it is necessary to clean the conveyor regularly.
Belt's slipping leads to its irreparable damage.