Joong Ang Coupling, Ms Coupling, PU Coupling for Vessel Coupling

• Standard Or Nonstandard：Standard
• Material：Virgin TPU
• Color：Yellow
• Hardness：93shore a
• Tensile Strength：30MPa
• Elongation：560%

=== Base Info ===

• Model NO.：3A2006
• Density：1.15g,cm3
• Transport Package：Packing in Cartons
• Specification：standard size
• Trademark：3A rubber
• Origin：China
• HS Code：39269090
• Production Capacity：1000000pieces,Month

=== Description ===

Basic Info.

Model NO. 3A2006 Density 1.15g/cm3 Transport Package Packing in Cartons Specification standard size Trademark 3A rubber Origin China HS Code 39269090 Production Capacity 1000000pieces/Month

Product Description

Joong Ang Coupling, Ms Coupling, PU Coupling for Vessel Coupling
 

Description: the polyurethane elastomeric is a new material of polymer synthetic between rubber and plastic. It has both high strength of plastic and high elasticity of rubber. Its characteristics are: 1, a wide range of hardness. It still has rubber elongation and resilience at high hardness. The polyurethane elastomeric has a hardness range of Shore A10-D80. 2. high strength. At rubber hardness, the tensile strength, tear strength and load carrying capacity are much higher than general rubber material. At high hardness, its impact strength and flexural strength are much higher than plastic material. 3, wear-resistant. Its wear resistance is very outstanding, generally in the range of 0.01-0.10cm³/1.61km, about 3-5 times than rubber material. 4, oil resistant. The polyurethane elastomeric is a highly polar polymer compound which has low affinity with non-polar mineral oil and is hardly eroded in fuel oil and mechanical oil. 5, good resistance to oxygen and ozone. 6, excellent vibration absorption performance, can do damping and buffering. In the mold manufacturing industry, it replaces rubber and springs.7, has good low temperature performance. 8, radiation resistance. Polyurethane is highly resistant to high energy radiation and has satisfactory performance at 10-10 deg radiation dose. 9, with good machining performance.

 

The polyurethane coupling, rubber coupling are made by injection with high quality TPU material or mould CSM/SBR. It is designing and special for all kinds of metal shaft coupling with very good performance of high tensile strength, high wear resistant, high elastic resilience, water resistant, oil resistant and excellent fatigue resilience, high impact resistant etc. We have full sets injection moulds and supply full range of GR, GS, MT, ML, MH, Hb, HRC, L, T, NM and Gear J series couplings etc. with high quality and excellent experience. Apply to all kinds of industrial metal shaft coupling.

 

Specifications:

material: TPU, CSM/SBR, NBR, nylon etc.

color: yellow, red, purple, green, black, beige etc.

surface: smooth

tensile strength: 8-55Mpa

hardness: 70-98Shore A

elongation: 400%-650%

density: 1.25g/cm³

elasticity impact: >25%

tear strength: 35-155KN/m

akron abrasion loss:<0.05cm³/1.61km

compression set (22h*70°C):<10%

working temperature: 120°C

standard size for polyurethane coupling: 

GR14, GR19, GR24, GR28, GR38, GR42, GR48, GR55, GR65, GR75, GR90, GR100, GR110, GR125, GR140, GR160, GR180

GS14, GS19, GS24, GS28, GS38, GS42, GS48, GS55, GS65, GS75, GS90, GS100, GS110, GS125, GS140, GS160, GS180

MT1, MT2, MT3, MT4, MT5, MT6, MT7, MT8, MT9, MT10, MT11, MT12, MT13

ML1, ML2, ML3, ML4, ML5, ML6, ML7, ML8, ML9, ML10, ML11, ML12, ML13

MH45, MH55, MH65, MH80, MH90, MH115, MH130, MH145, MH175, MH200

HRC70, HRC90, HRC110, HRC130, HRC150, HRC180, HRC230, HRC280

L35, L50, L70, L75, L90/95, L99/100, L110, L150, L190, L225, L276

FALK-R 10R, 20R, 30R, 40R, 50R, 60R, 70R, 80R

SBT T40, T45, T50, T55, T60, T65, T70, T75, T80, T85, T90, T95, T100, T105, T108, T110, T115, T120, T125, T130, T135, T140, T145, T150, T154, T170, T185, T190, T210

Joongang CR050, 070, 0010, 0020, 2035A, 2035, 3545, 4560, 6070, 7080

 

standard size for rubber coupling:

Hb80, Hb95, Hb110, Hb125, Hb140, Hb160, Hb180, Hb200, Hb240, Hb280, Hb315

HRC70, HRC90, HRC110, HRC130, HRC150, HRC180, HRC230, HRC280

L35, L50, L70, L75, L90/95, L99/100, L110, L150, L190, L225

NM50, NM67, NM82, NM97, NM112, NM128, NM148, NM168, NM194, NM214, NM240, NM265

NOR-MEX168-10, NOR-MEX194-10, NOR-MEX214-10, NOR-MEX240-10, NOR-MEX265-10

FCL1#, FCL2#, FCL3#, FCL4#, FCL5#, FCL6#, FCL7#, FCL8#

FCL90, FCL100, FCL112, FCL125, FCL140, FCL160, FCL180, FCL200, FCL224, FCL250, FCL280, FCL315, FCL335, FCL400, FCL450, FCL560, FCL630

Gear 3J, 4J, 5J, 6J, 7J, 8J, 9J, 10J, 11J, 12J, 13J, 14J

Hytre 4H, 5H, 6H, 7H, 8H, 9H, 11H

Tyre F40, F50, F60, F70, F80, F90, F100, F110, F120, F140, F160 

SBT T75, T80, T85, T90, T95, T100, T105, T108, T110, T115, T120, T125, T130, T135, T140, T145, T150, T154, T170, T210

FCLpin #1, #2, #3, #4, #5, #6, #8

 

standard size for nylon coupling:

NL1, NL2, NL3, NL4, NL5, NL6, NL7, NL8, NL9, NL10

M28, M32, M38, M42, M48, M58, M65

packing in cartons

OEM & customized size are agreed

special supply all kinds of steel coupling for FCL, NM, MH, HRC, Love Joy, Joongang, Centafelx, XL-GR, Tyre

***when you enquiry, pls confirm type, size number and quantity***

Joong Ang Coupling
MS Coupling
Size	Material	Hardness	OD(mm)	ID(mm)	Thickness H(mm)	ThicknessH1(mm)	Lamella Qty
CR0050/MS0511	Yellow TPU	93Shore A	25	9.5/12.5	10	11.2	6
CR0070/MS0714	Yellow TPU	93Shore A	35	13.7/19.0	13	15	6
CR0010/MS1119	Yellow TPU	93Shore A	48	17.0/23.5	14	16	6
CR0020/MS1424	Yellow TPU	93Shore A	58	22.0/28.8	15	17	6
CR2035A/MS1928	Yellow TPU	93Shore A	66.5	26.0/32.0	17	19	6
CR2035/MS1938	Yellow TPU	93Shore A	78	30.4/40.0	19	20	6
CR3545/MS2845	Yellow TPU	93Shore A	98	43.0/50.0	20	24	6
CR4560/MS3860	Yellow TPU	93Shore A	116	55.0/62.0	21	25	6
CR6070/MS4275	Yellow TPU	93Shore A	131	62.0/70.5	26	28	6
CR7080/MS6510	Yellow TPU	93Shore A	156	60.0/85.0	34	38	6