Conveyor Belt Crowned Drive/Head/Return/Tail/Idler/Snub/Take-up/Bend/Wing Drum Pulleys

• Material：Carbon Steel
• Surface Treatment：Polishing
• Motor Type：No
• Installation：Multi-Layer
• Pulley Type：Head Pulley, Tail Pulley, Snub Pulley, Take up Pul
• Diameter：102mm-1800mm

=== Base Info ===

• Model NO.：24"-52"
• Surface：Smooth, Diamond Grooved Lagging, Herringbone Laggi
• Welding：Submerged Arc Welding
• Balance Treatment：Dynamic Equilibrium and Static Equilibrium
• Structure：Tube, Shaft, Self-Aligning Bearing, Bearing Seat
• Pulley Lagging Type：Heat,Thermal Vulcanized Rubber Casting, Rubber Lag
• Standard：Cema, JIS, DIN, ISO, GB
• Bearing Type：Self-Aligning Ball Bearings
• Bearing Band：Hrb, , NSK
• Transport Package：Wooden Box Packing and Pallet Packing
• Specification：Steel(Q235)
• Trademark：JTURN
• Origin：Hengshui
• HS Code：8431390000
• Production Capacity：3000 Pieces Per Month

=== Description ===
TypeBelt width(mm)Standard Diameter(mm)Length(mm)Drive Pulley          500500

Length of the pulley depends on the belt width of the conveyor 

A conveyor pulley is more heavy-duty than a roller and is used at either end of a conveyor, or near the drive/motor. Choosing the right conveyor belt pulley can get tricky, which is where Heinrich Brothers Inc. can offer expert assistance.

Choose One of the Many Types of Conveyor Belt Pulleys:

Drive Pulley / Head Pulley

• A Drive Pulley or Head Pulley is used for the purpose of driving a conveyor belt. They are normally mounted in external type bearings and driven by a motor and reducer. Conveyor head pulleys can be flat faced or crowned and many have lagging to reduce belt slippage. Conveyor drum pulleys, wing pulleys and spiral pulleys are the most common style of drive pulleys.

Return Pulley / Tail Pulley

• Return/Tail pulleys are used to redirect a conveyor belt back toward the drive pulley. Conveyor tail pulleys can have internal bearings or can be mounted in external bearings and are usually located at the end of the conveyor bed. Conveyor tail pulleys commonly serve the purpose of a Take-Up pulley to keep tension on the belt.

Idler Pulley

• Any free spinning pulley used in a non-drive position used to support the belt.

Snub Pulley

• A conveyor pulley used to increase belt wrap tension around a drive pulley, typically for the purpose of improving belt traction.

Take-Up Pulley

• A conveyor pulley that can be adjusted in a bracket to increase or decrease belt slack or belt tension.

Bend Pulley

• A conveyor pulley used to redirect the belt and provide belt tension where bends occur in the conveyor system.