SMD 5050 LED Strip Light Grb Multi Color LED Strip Light RGB

Shanghai Legend Fung Industrial Co., Ltd. / 2022-06-27

SMD 5050 LED Strip Light Grb Multi Color LED Strip Light RGB

  • Certification:RoHS, CE
  • Power:6-10W
  • Emitting Color:Changeable
  • Voltage:12V
  • IP Rating:IP65
  • LED Source:5050SMD

=== Base Info ===

  • Model NO.:DV-FL-60SRGBW,WW-12
  • PCB Width:10mm
  • Transport Package:Carton
  • Specification:10mm
  • Trademark:Devry
  • Origin:China
  • Production Capacity:100000

=== Description ===
 5M/Roll; 300LEDs/Roll5M/Roll; 300LEDs/Roll
Details showA. LED Chip, EPISTAR.SMD 5050 LED Strip Light Grb Multi Color LED Strip Light RGB
B. PCB, Double layer pure cooper FPCB.SMD 5050 LED Strip Light Grb Multi Color LED Strip Light RGB
C. Brand resistance
SMD 5050 LED Strip Light Grb Multi Color LED Strip Light RGB
D. 3M double sided tape, Strong sticky.
SMD 5050 LED Strip Light Grb Multi Color LED Strip Light RGBInstallation Instruction
 

  1. Please choose correct power supply for led strips. The total power of the led strip is about 80% of the power supply, and it cannot be fully
  loaded to ensure that the power supply works at the correct and stable voltage.
  1. We suggest 5 meters/roll for the led strip. If it is over 5 meters length, the brightness of LED will vary greatly. If the customer can accept the
  case, length can be made over 5 meters/roll.
3. Adhesive tape on the back side of the strip, with its superior adhesive and weather resistance, and can be connected to any transparent glass, metal and plastic surface. But on some certain surfaces, such as cloth, wood, will affect its function and durability. Please test the adhesion of the led strip before installation.
4. Please pay special attention to the minimum bending diameter of the led strip is 60mm, so as to avoid direct or indirect damage to FPC and components on FPC, which may lead to damages of the strip .
5. In order to ensure waterproof and anti-corrosive function , after the power line is screwed into the connector, it is recommended to inject the connector with a single component of silica gel (or neutral glass glue, or waterproof grease) and cover the exposed copper wire of the power line for protection.
6. The non-waterproof led strip shall not be completely exposed for outdoor use. Do not touch or install the strip when it is charged.
7.It is recommended to use switch power supply that has passed relevant safety regulations (with short circuit protection, over voltage protection and over current protection).



Pay attention
1. Pay attention to handling with care;
2. Don't install the product in corrosion, flammable and explosive places;
3. It is strictly prohibited to use any acidic or alkaline adhesives to fix the product. Neutral adhesives are required;
4. In order to avoid the danger of electric shock, please cut off the power supply during process of installation, debugging and moving;
5. Ensure correct and reliable connection of all joints;
6. The product need anti-corrosion environment, such as, avoiding damp, water drop or other adverse elements.
7.The LED strip and accessories can't be squeezed or folded;
8. PCB conductive parts can't be damaged when installation;
9. Installation must conform to electrical safety standard. The LED strip can only be installed by
Professionals;
  1. Ensure power supply transform operating load with transformer;
  2. When install on metal or conductor surface, insulation protection need to be provided to the contact area;
  3. Observe positive and negative polarity, ensure correct connection to avoid damaging LED strip;
  4. When installation, please prevent static electricity;
  5. If you have any questions about this product, please consult our salesman.
QA&QC
SMD 5050 LED Strip Light Grb Multi Color LED Strip Light RGB
Transportation
SMD 5050 LED Strip Light Grb Multi Color LED Strip Light RGBFAQ
Q1. Can I have a sample order for led light?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

Q2. What about the lead time?
A:Sample needs 5-7 days, mass production time needs 1-3 weeks for order quantity more than

Q3. Do you have any MOQ limit for led light order?
A: Low MOQ, 1pc for sample checking is available

Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.


Q5. Is it OK to print my logo on led light product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.

Q7: Do you offer guarantee for the products?
A: Yes, we offer 2-5 years warranty to our products.

Q8: How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%.
Secondly, during the guarantee period, we will send new lights in next order.
 

Copyright 2024 357th.com All Rights Reserved