• Usage：Filling Material
• Usage Times：Non-Disposable
• Applicable Departments：Dental Department
• Nature：Specialized Instrument Equipment
• Certification：CE
• Instrument Classification：Class I

=== Base Info ===

• Model NO.：1400800101
• Dentin Color：A1,A2,A3,A3.5,B1
• Sku：1400800101
• Light Cure Composite：4G, Syringe*5
• Total Etching Adhesive：5ml, Bottle*1
• Syringe Needles：5PCS, Box*1
• Net Weight：188.4G
• Transport Package：Carton for Dental Composite
• Specification：A1, A2, A3, A3.5, B1
• Trademark：DENTEX
• Origin：Henan, China (Mainland)
• Production Capacity：5000 Pieces,Month

=== Description ===

Basic Info.

Model NO. 1400800101 Dentin Color A1,A2,A3,A3.5,B1 Sku 1400800101 Light Cure Composite 4G/ Syringe*5 Total Etching Adhesive 5ml/ Bottle*1 Syringe Needles 5PCS/ Box*1 Net Weight 188.4G Transport Package Carton for Dental Composite Specification A1, A2, A3, A3.5, B1 Trademark DENTEX Origin Henan, China (Mainland) Production Capacity 5000 Pieces/Month

Product Description

High Performance Self-Etching Dental Light Cure Composite kit 

Description of Dental Light Cure Composite Kit:

(1)Preparation: isolate and prepare tooth.
(2)Cleaning: rinse the preparation with water.
(3)Drying: gently air dry until there is no visible water.Do not allow enamel or dentin to dry for an excessive period of time.
(4)Applying Dentex Self-Etching Light Cure Adhesive (DSA): 
dispense 1-2 drops of DSA into a mixing well, apply enough DSA to the entire preparation with a little brush until a shiny surface is achieved and then wait for 10 seconds (DSA should not be applied too much ). Use a gentle stream of air to evaporate the solvent for 5 seconds. (If using a non self-etching adhesive, an etching step should be used according to the manufacturer's instruction).
(5)Cure: light cure for 20 seconds at 500±50mW/cm2. Keep the distance to exposure surface less than 4 mm.
(6)Applying Dentex light cure composite (DLC): place selected DLC into

cavity preparation following by light cure. According to following table, the curing time is recommended for different depth and color shades. In order to reduce shrinkage stress, for a large cavity, an increment filling is recommended. In general, 1-2 mm increments are placed into cavity preparation from different sides and the restoration is built incrementally. Each increment is light cured for 30 seconds.
(7)  Finishing: after light cure, adjust restoration.
(8)  Polishing: use polishing strip or disc to polish the surface

Features$Advantages:

Unique dispersion technology ensure the filler evenly distributed
Radioopaque and fluoride releasing Optimal polishability and high shade stability.
Excellent handling, not sticky to instrument;
Suitable for most cases of restoration, extensive indication of usage.
WARNING: 
Do not use this product for patient who is allergy to methylmethacrylate. Do not use this product with any material contained eugenol.   
PRECAUTIONS:  
Methmethacrylate resins may cause skin sensitization in susceptible persons. In case of contact, wash skin with soap and water. In severe situation, get medical attention. 
ATTENTION:  
To an exposed pulp, a pulp capping material such as Calcium hydroxide may be used before using this product. 
STORAGE:
Store at 25ºCor less in a cool and dry place and avoid direct sun exposure. 
Recap the syringe after use. 
DISPOSAL:
After the product is used up, dispose it as normal medical rubbish. 
SHELF LIFE:  3 years


Package:

REFILL:
Light Cure Composite: 4g/Syringe*5
Syringe Needles : 5pcs/ box*1
Total Etching Adhesive: 5ml/Bottle*1
Etching Gel: 2.5ml/Syringe*1
Applicators Brushes: 20pcs/box*1
Net weight:188.4g
COLOR: A1,A2,A3,A3.5,B1

 

 

Packaging and shipping: 
1. Mainly packed by carton or other common security package, you also can give us your special requirements about it. We will try our best to make sure the goods arrive safely.
2. Delivery: About 5 days after order confirmed.
3. Freight: The freight cost will charge according to the weight of detailed order.
4. Shipment: Your goods could be shipped to you as your requirement such as by air or by sea, full way tracking for your cargos offered before the arrival of the goods.  





Other Dental Products for Your Choice:






Company Information
Baistra Corporation was established in 1998. which is specialized in manufacturing and exporting dental equipment, we have a group of honest, kind, and hard-working people with a thrifty and responsible attitude that has won all our customers' trust .


 

Why Choose Baistra Company:
1. Professional on dental field for 24 years with advanced facility.
2. Factory price with best quality
3. Accept custom order, available in thickness and package
4. Offer OEM service.
5. Fast service and on-time delivery
6. Sample small quantity sample are available at any time.

 

Our services:

Pre-sale service:

1. 24 hours online, please feel free to contact us anytime.

2. Provide our customers best quality product.

3. High degree of expertise to solve any problems 

After sale service:

1. Fast delivery with tracking number provided to make sure ou can receive your goods fast and safety.

2. Offer free warranty service.

3. Focus on every client's satisfaction. Professional team will solve any problems you may meet In the process of using.

 

FAQ:

1.Q:Can I have a sample order?
    A:Yes, we welcome sample order to test and check quality. 

2.Q:What about the lead time?
   A:Sample needs 3-5 days, mass production needs 1-2 weeks depends on order quantity.

3.Q:How do you ship the goods and how long does it take to arrive?
   A:We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.

   

Any questions, please send us message freely!