NSK Style Low Speed Straight Contra Angle Air Motor 2 or 4 Holes

• Condition：New
• Certification：TUV, ISO, CE
• Material：Aluminum
• Light Way：Without Light
• Water Way：Outer Channel
• Usage Times：Non-Disposable

=== Base Info ===

• Model NO.：S-06
• Application：Adult, Child
• Loading Way：Gland Type
• Head Diameter：Middle Head
• Exhaust Way：Exhaust Outside
• Number of Holes：Two Holes
• Connection：Without Quick Connector
• Rotating Speed：Low-Speed Handpiece
• Noise：Less Than 70dB
• Chuck Type：Latch Type
• Transport Package：Plastic Box
• Specification：Aluminum, stainless steel
• Trademark：TEALTH
• Origin：China
• HS Code：90184100
• Production Capacity：50000PCS,Year

=== Description ===

Descriptions

E-type Low-speed 1:1, with external cooling system

Air pressure

245~392kPa (2.5-4.0 kgf/cm²)

Atomized water pressure

200 kPa

Atomized air pressure

200 kPa

Rotation Speed

16 000~20 000r/min

Chuck type

Push button/ Latch type

Bur applicable

Φ2.334~2.350 mm

Noise

≤70dB

[Handpiece inserting & removal]

Inserting

Insert the E-type handpiece onto the motor and turning all the way until it click to stop.

Removal

Grip both handpiece and motor respectively, pulling and separating.

[Forward/Reverse Rotation]

1) Forward Rotation: Turn the FWD/REV change ring to"F".

2) Reverse Rotation: Turn the FWD/REV change ring to "R".

3) When the FWD/REV change ring is positioned in the middle of "F" and "R", the drive air is interrupted and the motor does not rotate.

4) When FEW/REV change ring is positioned in F or R, the rotation speed is maximum.

[Maintenance & Care]

After each treatment, sterilizing handpiece in autoclave according to the following steps:

1. Remove the bur, use brush to clean handpiece, then cleaning outside of handpiece with alcohol solution.

2. Lubricate handpiece.

3. Package into autoclaving pouch.

4. Autoclave the handpiece for 12 min at 135ºC.

5. Dental handpieces cannot be soaked in a disinfectant with acidic liquid. it will seriously damage the bearings and handpiece internal components

6. Do not use an ultrasonic cleaner to clean the dental handpiece.

7. It is not recommended to repair the dental handpiece by little experience person. For repairing, please return to the factory or send to the designated after-sales service maintenance office.