Infrared Motorcycle Dynamic Balancing Machine

Tenda Enterprise Holdings Co., Limited / 2022-06-23

Infrared Motorcycle Dynamic Balancing Machine

  • After-sales Service:Videocall, Online&Face to Face Training Acceptable
  • Warranty:14 Months
  • Balancing Type of Wheel:Off-Car Type
  • Balancing Range:Small Size Wheel
  • Design Type:Horizontal Type
  • Function:Dynamic Balance, Static Balance, Wheel Balance, Motorcycle Balance, Well Balanced, Auxiliary Implicit Procedure, Calibration Procedure

=== Base Info ===

  • Model NO.:B653M
  • Working Noise:<70db(A)
  • Condition:New
  • Certificate:CE Certificate
  • Power:250W
  • Balancing Speed:200 R,Min
  • Motor Power:110V,220V,240V, 50Hz,60Hz
  • Rim Diameter:10-28"
  • Max Wheel Diameter:1000mm
  • Max. Wheel Weight:70kg
  • Rim Width:1.5-20"
  • Calibration Wheel:15" Steel Rim Wheel
  • Max Wheel Weight:70kg
  • Machine Weight:N.W:105kg G.W:120kg
  • Packing Size:1000*650*1160mm
  • Optional Specifications 1:Optional Pedal Brake
  • Optional Specifications 2:Optional Laser Light
  • Optional Specifications 3:Optional Motorcycle Adaptor
  • Transport Package:Plywood
  • Specification:1000*650*1160mm
  • Trademark:YuanMech
  • Origin:Yingkou, Liaoning, China
  • HS Code:9031100090
  • Production Capacity:3000PCS,Month

=== Description ===
Infrared Motorcycle Dynamic Balancing Machine
1. How does the wheel balancer work? What are the functions of the main components? 
Piezoelectric sensor get "vibration" signal and send it to CPU. Encoder board get "position" signal and send it to CPU. CPU calculate imbalance based on these signals, wheel dimensions and balancing mode. (Please contact us if you have more questions on this topic)

2. What are the common test programs inside wheel balancer software? 
Common tests are: piezoelectric sensor test, Encoder test, Distance/Diameter/Width measurement sensor test, keyboard test, display test, motor test (Please contact us if you have more questions on this topic)

3. How to test capacitor inside single phase motor?
Discharge the capacitor. Set the multimeter to measure resistance. Connect probes to leads of capacitor. The meter will show a reading and soon will display an open circuit (infinity). Note down the reading that was displayed for that short period. Repeat the test several times. Every test should show similar result for a good capacitor.

 

Copyright 2024 357th.com All Rights Reserved