Tealth Contra Angle Head Fit for Kavo Low Speed Handpiece

• Condition：New
• Certification：TUV, ISO, CE
• Material：Stainless Steel
• Light Way：Without Light
• Water Way：Inner Channel
• Usage Times：Non-Disposable

=== Base Info ===

• Model NO.：L6-01
• Application：Adult, Child
• Loading Way：Gland Type
• Head Diameter：Middle Head
• Exhaust Way：Internal Exhaust
• Number of Holes：Two Holes
• Connection：Without Quick Connector
• Rotating Speed：Low-Speed Handpiece
• Noise：Less Than 70dB
• Irrigation：Internal Irrigation
• Transport Package：Plastic Box
• Specification：Aluminum, stainless steel
• Trademark：TEALTH
• Origin：China
• HS Code：90184100
• Production Capacity：50000PCS,Year

=== Description ===

Basic Info.

Model NO. L6-01 Application Adult, Child Loading Way Gland Type Head Diameter Middle Head Exhaust Way Internal Exhaust Number of Holes Two Holes Connection Without Quick Connector Rotating Speed Low-Speed Handpiece Noise Less Than 70dB Irrigation Internal Irrigation Transport Package Plastic Box Specification Aluminum, stainless steel Trademark TEALTH Origin China HS Code 90184100 Production Capacity 50000PCS/Year

Product Description

Product name: Kavo type contra angle head
Order code: L6-01/L6-02/L6-03/L6-04

L6-01: φ2.35mm, 24,000rpm
L6-02: φ1.60mm, 24,000rpm
L6-03: φ2.35mm, 40,000rpm
L6-04: φ1.60mm, 40,000rpm
Parameter:
Push button type,Kavo type intra head
Inner water spray ,perfect cooling systerm
Be compatible with FG bur or CA bur head(Φ1.60mm/Φ2.35mm)
Match with KAVO®, MK®, TEALTH®
Imported bearing

Bur inserting & removal:
After bur stop, press the push button firmly and remove the bur.
Press the push button firmly and Insert the bur in the segment of the rear of the head as far as it will go by turning it gently. Check the function of the chuck by pulling on the bur.


Contra angle handpiece head:
Loosen the union nut in the direction of arrow and separate the head.

Contra angle head Storage and transportation conditions: 
Temperature: -10~40ºC
Humidity: 0~80% RH
Atmospheric pressure: 70-106 kPa
Moisture proof, avoiding sunshine and heat source during transport.


Dental handpiece Maintenance & Care:
After each treatment, sterilizing handpiece in autoclave according to the following steps:
1.Remove the bur, use brush to clean handpiece, then cleaning outside of handpiece with alcohol solution.
2. Lubricate handpiece.
3. Package into autoclaving pouch.
4. Autoclave the handpiece for 12 min at 135ºC.
5. Dental handpieces cannot be soaked in a disinfectant with acidic liquid. it will seriously damage the bearings and handpiece internal components
6. Do not use an ultrasonic cleaner to clean the dental handpiece.
7. It is not recommended to repair the dental handpiece by little experience person. For repairing, please return to the factory or send to the designated after-sales service maintenance office.