Dental Instrument Medical Equipment of NSK Fx External Water Handpiece 1: 1 Low Speed Handpiece Kit

• Condition：New
• Certification：ISO, CE
• Material：Stainless Steel
• Light Way：Without Light
• Water Way：Outer Channel
• Usage Times：Non-Disposable

=== Base Info ===

• Model NO.：Low speed handpiece
• Application：Adult, Child
• Loading Way：Gland Type
• Head Diameter：Small Head
• Exhaust Way：Exhaust Outside
• Number of Holes：Non
• Connection：Without Quick Connector
• Rotating Speed：Low-Speed Handpiece
• Transport Package：Standard Export Carton
• Specification：400g,set
• Trademark：Topmed
• Origin：China
• HS Code：90184100
• Production Capacity：500,Month

=== Description ===
Chuck typeLatch typeHoles4 holes for choiceWeight0.2kgWater SprayExternalAir Pressure0.25-0.3(Mpa)Water pressure198Kpa(2Kg)Forward rotation speed18(krpm)Reversal rotation speed16(krpm)Torque0.4-0.45(N)Bur sizeΦ2.334-Φ2.355(mm)Water flow90(min/ml)-110(min/ml)Water pressure0.2(Mpa)-0.23(Mpa)Noise≤65dB


Features

 Contra angle handpiece

- Low Speed 22,000-28,000 rpm.
- The shank of the instrument mounted therein is 2.35 mm
- Fastening of the instruments with a turning latch
- Autoclavable 135°C
- For any lab or E-type motors
 

Straight handpiece
- Working pressure: 0.3MPa (2-hole);
- 0.25MPa (2-hole) (Measure meter is installed at the end of air motor to measure the air pressure).
- Revolution: about 22000-28000r/min (adjustable between clockwise or anticlockwise)
- Noise: ≤68dB
- Air consumption: about 56L/min
- Ratio: 1:1
- Max speed of contra angle: 25000rpm/min.
 

Air Mortor

- Supply air pressure: 245-392KPa (2.5-4kgf/CM2)
- 1:1 Direct Drive
- 2 holes
- Max speed 20,000 min-1

Picture












Handpiece maintaince

There are two methods of cleaning dental handpieces. One is to use an automatic handpiece system, such as the QUATTRO care Plus, prior to sterilization. The other option is to manually maintain your handpieces. If you elect to manually maintain your handpieces, here are the steps to do so. 
 
 
Step 1: Clean Handpiece
The first step in cleaning a dental handpiece is to lightly wash the handpiece under cool running water to remove excess debris.

Step 2: Handpiece Lubrication
Following external cleaning, connect the handpiece to the handpiece lubricant spray using the appropriate nozzle for the handpiece you are cleaning. For this air handpiece, we are using a multiflex nozzle.  Spray for approximately 2 seconds. We recommend using a cloth or paper towel wrapped around the handpiece to contain the spray. It is ok if some excess lubrication remains in the handpiece.

Step 3: Purge Handpiece
After lubrication, you'll want to purge your handpiece. Simply connect the handpiece to your multiflex connection, step on the foot petal and purge for 30-40 seconds. The handpiece is now ready for sterilization.