Cylindrical Roller Bearing RW111 (520228) /Roller Bearing/Full Complement Roller Bearing/China Factory

• Aligning：Non-Aligning Bearing
• Separated：Unseparated
• Rows Number：Single
• Load Direction：Radial Bearing
• Application：Automobile Maintanance
• Capacity：Strength Type

=== Base Info ===

• Model NO.：RW111(520228)
• Sealed Type：Open
• Transport Package：as Required
• Specification：Consult
• Trademark：Neutral, VAFEM, as required
• Origin：China
• HS Code：84825000
• Production Capacity：30000 PCS , Year

=== Description ===

Basic Info.

Model NO. RW111(520228) Sealed Type Open Transport Package as Required Specification Consult Trademark Neutral, VAFEM/ as required Origin China HS Code 84825000 Production Capacity 30000 PCS / Year

Product Description

Cylindrical Roller Bearing RW111(520228)/Roller Bearing/Full Complement Roller Bearing/China Factory


Technology utilized for the production of the bearings provides significant advantages to customers due to minimal maintenance costs. Each bearing should have longer life span and should operate without any problems during the exploitation. However, it should be noted that certain external factors affect the quality of bearings as well. They should not be exposed to excessive heat and must be protected from ingress of foreign matter. Also, Bearings must be properly lubricated.

Modern ball bearings stand up to growing demands of operation in difficult conditions with increased productivity. Further development trends set demands for longer exploitation life under harsh conditions and more cost-effective design for agricultural machinery. VAFEM bearings provide cost-effective solutions and are extensively applied in agricultural machinery production. These bearings are quick and easy to mount. Wide inner ring can be mounted on the shaft by the eccentric ring, screws or adapter sleeves. Seals are specially designed and fitted to the outer rings. The advantages of these bearings have led to their rapid adoption by manufacturers of agricultural machinery.

Each VAFEM bearing is produced in accordance with strict premium quality standards.
-VAFEM bearing units consist of a housing which is made from either cast iron or pressed steel; The insert bearings inside have a self-aligning feature due to their spherical outer diameters and the corresponding design of the bearing housing. This feature allows for any static misalignment.


--Various seals design is available, typically single, triple lips, as well as six lips are available based on different bearing arrangement and requirements for each application.
-Rings and ball Material, Rubber Seal, Grease, as well as internal design of bearings are carefully selected.
- When low temperature is required, we have solution to meet with it.
-When axial load is required, we have design of four point contact bearing to meet with it.

Also we can also provide design solution to meet with customer requirements, and we have been proven successful in helping OEM customers to provide comparable performance with more economical VAFEM bearings 



 

No.	Model Number	Note	No.	Model Number	Note
1	VA-1002(CF16)		39	4304599
2	pillow block bearing with pressed housing  PQN001775		40	SM5-SPL BB106
3	5914-2RS-28 GG GH		41	JA025XPO
4	5914-2RS-28 GH		42	8505-18-RS
5	RES3.008		43	NJG2308.VH
6	RES3.004		44	CR36VUUR
7	DW4KX		45	SUCSP205-16
8	DF07A74CS16		46	A200903
9	DAC3055W		47	SC0929
10	NJK207		48	4304080
11	332/28JR		49	375000
12	614114		50	7205BE-2RZP
13	PFLD254H		51	CYR1S
14	VKBA6721AX		52	CYR1-1/4S
15	VKBA6722		53	HJ162416
16	40BCV09S1		54	HJ202816
17	AB175216		55
18	AB082211		56
19	AB082314		57
20	AB305513		58
21	7901UCDTP5		59
22	MUB7307UM		60
23	MUB1307UM		61
24	6901PJ		62
25	VKM12200		63
26	FC65662		64
27	41-3045		65
28	41-3032		66
29	41-3029		67
30	41-3055		68
31	41-3021		69
32	41-3053		70
33	41-3054		71
34	116080180		72
35	116080190		73
36	CT1310		74
37	N6009-4RS		75
38	SC04A90N		76