Diamond Wire for Granite Quarry

• Application：Granite
• Type：Sinter,Brazed
• Item：Diamond Wire for Granite Quarry
• Business Type：Manufacturer
• Coating：Spring
• Beads Qty.：40,39,37,33,28,26 Beads,M

=== Base Info ===

• Model NO.：HZ34856
• Service：OEM, ODM, Customized
• Transport Package：Carton Box
• Specification：Diameter 7.2,8.5,9,10,10.5,11,11.5mm
• Trademark：HUAZUAN
• Origin：Quanzhou City, Fujian Province, China
• HS Code：82029910
• Production Capacity：50000 Meter,Month

=== Description ===

ServiceOEM, ODM, Customized



 

1.Diamond Wire Saw For Quarry:

 We recommend rubber wire,it can protect the wire saw rope very well and increase the wire's strength.

The rubber has good temperature resistance, and it can be used when water is not enough. 

Strong flexibility can reduce the cut-in-one-side problem.
 

2.Diamond Wire Saw For Block Dressing:

We recommend plastic wire,it can be used to dissect marble granite.

It can cut accurately with small inter-space.

It can cut the block with the thickness of 2.3M
 

3.Diamond Wire Saw For Profiling :

We recommend plastic wire for shaping operations provides a huge range of possibilities 

It makes smooth surface, and accurate sizes with small inter-space.

Columns and elements for the building industry can be produced in  much more economic way.
 

4.Diamond Wire Saw For Reinforce Concrete Cutting:

We recommend 10.5/11.5mm Rubber and Spring wire.

The wires are widely used in the reinforced concrete with more than 5% steel inside.

Used in the building constructions, cutting for houses,bridges,cement pipes and under waster buildings.
 

5.Diamond Multi-Wire Saw For Slab Cutting:

Diamond multi-cutting wire saws are suitable for cutting the different kinds of large granite slabs

Remark :modern gang saw can produce in a month 3000 to 4000 square meters of slabs of 2cm thickness

The multi-wire can produce 5000 to 6000 square meters of slabs cut at any thickness between 1 to 5 cm.



Company Information


Diamond Diamond Wire 

FAQ of Diamond Wire

• What is the maximum thickness of concrete granite stone etc you can use your wire saw cut?
  Depending on the process, Diamond can saw various thicknesses, for example:
  Wall saws will typically cut concrete or masonry up to a thickness of 24 inches. In the event that the wall to be cut can be accessed from both sides, a total thickness of 48 inches can be sawed.
• Slab saws will typically cut up to 24 inches deep through concrete, asphalt, or brick paving. When thickness exceeds these depths Diamond is equipped to create openings with wire saws.
• With a wire saw depth is or thickness is unlimited. Wire saws are capable of cutting through press bases, concrete foundations, reactor vessels, stainless steel, and more.