Ce Approved Polystyrene Machine PS Foam Food Container Machine (MT105/120)

=== Base Info ===

=== Description ===
F. Hauling-off System Rubber Roller3 pcs, (according customer's requirement)3 pcs, (according customer's requirement)3 pcs, (according customer's requirement)Traction Speed3-31m/min3-31m/min3-31m/minMotor1x 4-pole, 3 kw (controlled by frequency changer)1x 4-pole, 3 kw (controlled by frequency changer)1x 4-pole, 3kw (controlled by frequency changer)G. Winding Device   Winding Pneumatic Shaft2 pcs (according customer's requirement)2 pcs (according customer's requirement)2 pcs (according customer's requirement)Torque motor  2sets2sets2setsH. Die Material   Installation Power  200kw200kw245kwCentral height1000mm1000mm1000mmI. Weight  6 T8 T13.5T
PS Foam Food Container Forming Machine with Mechanical Hand     

The machine is all-powerful thermoforming machine with integrating vacuum forming, cutting off, stacking parts and counting of products, composited with those parts as below:
Loading parts- heating parts( three heating zone)- forming parts- cutting off parts- double workstation mechanical hand- winding parts for scraps (or crusher in line)- products conveyor double station.
The machine, with great dependable stability, integrates the forming, cutting off, and stacking as well conveyor at the same time.
The machine is much convenient for operator as the humanly design. In addition, it has the feature of the bigger forming area, faster speed of forming and highly automation.
The products will be collected with stacking parts and conveyed automatically via conveyor. The scraps will be winded or crushed in line also.
The more energy will be saved, the safety of operator will be enhanced, but the cost of running machine will be economized.
The heating parts of machine is designed to be three heating control, the temperature of which is from low to high, in order to make the products perfect.
As the performance of PS foam sheet, such as strength, stretch and heating-resist,  will be favorable for the forming in the low temperature setting.
There is hydraulic station used for the forming and cutting off parts as the driving, with the feature of big molds punch power and higher speed.
And the cutting off board could be moved forwarder and back to meet the actual needs of different molds.
The knife molds could be micro-adjusted to get the accurate cutting.
The mechanical hand of machine could be adjusted to move up and down, front and back, using the electronic adjustment control, to meet the different needs of molds with various sizes. And the suction cup of mechanical hand could be added or reduced as the real operations to meet the needs of final products.


 3phase 380V 50Hz
3phase 220V 60Hz
Recycling machine       
Recycling machine can process PS/PE/PP material and it is mainly used to recycle the high foam polystyrene and high foam polystyrene products. It is the ideal equipment to recycle the waste materials. It features compact structure and easy operation.

Single Screw Granule Maker(Option)3phase 380V 50Hz
3phase 220V 60Hz
Double Screws Granule Maker(option)








Our Advantages        

A. Machine advantage:
In order to assure the reliability of the equipment operation,the main electric components adopt:German Siemens frequency exchanger, Japanese Mitsubishi PLC, Japanese Omron servo motor, Japan RKC temperature control etc.
the operation of the equipment is more humanizing, handle easily and simple to operate. The frame structure of our machines are magnificent strong and adopts superior materials to ensure the stability of equipment operation.
The operation of the equipment is more humanizing, handle easily and simple to operate.Especially our Fully Automatic Vacuum forming machine,only need 2 workers,you can reach your goal. 
As the professional Plastic machine manufacturer, we keep pace with time, and keep the technical research.

B. Services Advantage:
We are professional in providing TURN-KEY project, from raw material,formulation,machineries to finished products,until now we have many sucessful turn-key project all over the world,like Nigeria,Egpty,
Vietnamese,Pakistan,Mozambique and so on.
As a machine user,you will pay more attention to the after-sales services, in order to serve our customers,we provide 24 hours on-line after-sales services to save our customers' time.

Trouble Shooting       
If the sheet has wave, how to solve the problem?
Please check the gas volume in, check the temperature, check the cooling water system.
Could be the LNG worked as foam agent instead of the butane gas.
Yes, but it's much be in liquid station, and the purity will be higher. 

 FAQs          

• We are new in this field, how can we set up a factory?
  Dear, don't worry, we did many turn-key project from 2008 until now, we have enough experience for helping you setting up a new factory, and we can provide the raw material (GPPS, HIPS, mast batch and so on), formulations, machines, and your factory design & layout, and we will arrange our engineers go to your factory for installation and training, you have Melite Team, take it easy, we are at your services all the time.

• When your engineers are in our factory, everything is going on well, after they leave our factory, our workers cannot operate the machines, what shall we do?
  Firstly, we will let our 24 hours on-line services team to help you check which kind of problem you meet, if we cannot solve the problem online, we will arrange our engineer fly to your site to solve your problem ASAP, your problem is our problem, Melite and you are together like a family forever.
• Where is your factory located? How can I visit there?
  Our factory is located in Yantai city, Shandong province, you can fly to Yantai or Qingdao airport, Yantai airport is nearer than Qingdao airport.When you confirm flight No. and time, please feel free to contact us, then we will pick up you on time.

•  What should we prepare except material?
  You should prepare workshop, water line, electric line, compress air. We can supply workshop layout drawing according to your workshop
• How to choose model?
  Tell me your requirement (box size and capacity), we will help you to choose one accordingly.

• How many countries have your machine been installed?
  In Africa, we have machines work in Egypt, Nigeria, The Republic of South Africa, Benin, and Mozambique and so on. With our customers support, we were successfully set up more than 60 lines all over the world.

• How do you after-sale service word if the product got damaged?
  In the guarantee time 12 months, our general after-sale service is changing the damaged parts for the customers, but if the damage can be repaired by slight cost, we would wait for the customer's bill for the fix cost and refund this part of cost.(note: vulnerable part do not include)

• Will you Test machine before placing order?
  We will make the machine running during your visiting to check the working condition. And there is some client who bought our machine in our city, We will take you to their factory to check all working flow.

• Will you conduct training for our staff here?
  Yes, we will arrange our professional engineers to install and test machine and train the buyer's engineers.

• Machine adjustment and installation
  We can send technicians go to customers' country for machine adjustment and installation.
•  How can you send the equipments to my country?
  We can arrange shipment to the destination port for you, as we have cooperated with experienced forwarding agents. We can quote you competitive freight cost.