Hand-Held Splitting Rod with Single Machine Cutting Force up to 480t

• Motor Type：DC Motor
• Engine Type：Electric
• Certificate：CE, ISO, CCC
• Condition：New
• Power Pack：Diesel, Gasoline, Electric
• Drilling Depth：200-550mm

=== Base Info ===

• Drilling Diameter：40-45mm
• Splitting Tonnnage：500-2000tons
• Transport Package：Wooden Box
• Specification：1cubic meters
• Trademark：ZHONGTUO
• Origin：China
• HS Code：8474209000
• Production Capacity：50piecces,Month

=== Description ===

Basic Info.

Drilling Diameter 40-45mm Splitting Tonnnage 500-2000tons Transport Package Wooden Box Specification 1cubic meters Trademark ZHONGTUO Origin China HS Code 8474209000 Production Capacity 50piecces/Month

Product Description

Hand-held splitting rod with single machine cutting force up to 480t

Introduction

hydraulic rock splitter is a new method for demolition project. 

Power units are availiable in three types-Diesel,Gas and Electric to suit all job conditions. When selecting a power unit, the following points should be considered:

Job conditions usually determine type of power for the hydraulic pump.

Air-Since most of the time air power is used to drill, power unit with air motor will always be useful. Noexhaust gases, not affected by water.

Gas-When all available air must be used for drilling, or when compressor is removed prior to splitting, or where power unit must be moved around frequently, a gas power unit is advantageous.

Electric-it is quiet, no exhaust gases, useful inside buildings, crusher installations.Less maitenance required.

All models can be converted from one power unit to another. Gas to air, elctric to gas, air to electric.

Description
It is a machine which is used in mining work of construction stones, the secondary breaking of large rocks and the partial or integral removing concrete facilities. It can split the objects into many pieces in the natural cleft surface.

Advantages
Granite rock splitter is one of the efficient, safest and easiest ways of mining, dimensional stone quarrying, demolition & removing mass and reinforced concrete.
New model no splitter standard configuration is 3 aluminum cylinder with centre wedge and one counter wedge for each, and plus diesel motor engine, pump station, and high pressure hose etc.

How a  rock splitter Works:

The wedges are placed into a drilled hole. When a splitter is operated, the power pack produces high pressure oil to drive the piston of the splitter cylinder which in turn pushes the middle wedge down. The downward movements of middle wedge forces two counter wedges against the wall of the hole. When the tension increases beyong the tensile strength of the material, a split will occur.

Step 1: Drill the holes in the rock/concrete required to split of suitable diameter and length.

Step 2: Put the wedge group of cylinder into the hole. Check the position before starting the splitter.

Step 3: Once the splitter is initiated, a crack will be developed due to expansion of counter wedges. The cracking direction of the rock/concrete is the same as of the splitter handle



How to break reinforced concrete with rock splitter


Parameters of hydraulic rock splitter:

model	Drilling diameter(mm)	Drilling depth(mm)	Theoretical split(t)	height(mm)	Stand-alone weight (kg)
ZT80	42	450	520	1000	35
ZT90A	40	450	560	950	28
ZT90B	42	300	520	920	30
ZT90C	42	200	500	888	25
ZT100A	45	550	580	1050	37
ZT100B	45	400	560	980	36.5
ZT100C	45	300	520	830	32
ZT80/2	45	500	2150	1020	75
ZT-S	42	450	520	780	18

FAQ:
Q1: Are you factory or trade company?
A1: We are factory. And we have ourselves trading company.
 
Q2: What the exactly address of your factory?
A2:  No.27,Beichen Village Industrial Park, Weiyang District, Shaanxi Province China.                                                                                                                            
Q3: Warranty terms of your machine?
A3: One year warranty for the machine and technical support according to your needs.

Q4: Will you provide some spare parts of the machines?
A4: Yes, of course.

Q5: What about the voltage of products? Can they be customized?
A5: Our standard voltage is 380V, 50HZ, 3phase. The voltage can be customized according to your equirement.
 
Q6: Which payment term can you accept?
A6: 100% T/T( Decide according to actual situation)

Q7: How long will you take to arrange production?
A7: we can delivery the normal goods within 7-15 days. Other nonstandard electrical items we will delivery within 25-30 days.
 
Q8: Can you accept OEM orders?
A8: Yes, with professional design team, OEM orders are highly welcome.
 
Q9: Which trade term can you accept?
A9: Available trade terms: FOB, CIF, CFR, EXW, etc.

Q10: Do you provide samples? Is it free or extra?
A10: Yes, we could offer you the sample machine. But it's not free. You need to pay for the sample and the cost of freight.

Q11: What is your terms of payment?
A11: We accept T/T, Western Union, Money Gram, Paypal, L/C, etc.
   
Our Company Information:


We have been focusing on high-quality mechanical equipment and construction products for more than 20 years. Especially have rich experience at mining equipment, main products include:

Ultra Large Rock Splitter
Submersible Drilling Rig
Spraying Machine
Grinding Machine

About Our Factory:


About the products:



Packing and Shipping:


Purchase Process:


About the Quality:

Why you choose us:

1. We are a real factory offering products and provide free technical advice.
2. Company in business for many years and served Over 50 countries customers.
3. All machine with CE, ISO,SGS certificate. Machine and spindle warranty 1 year. 
4. We have phone support in English, if you have any questions, you can call us, and we can give you the best solution within 24 hours.
5. Fast delivery, save your time. 

Contact us: