Clj Manufacture Mnsw30df Horizontal Emery-Roller Rice Whitener Machine

• Type：Rice Mill
• Voltage：380V
• Appearance：Horizontal
• Press Materials：Rice
• Condition：New

=== Base Info ===

• Model NO.：MNSW30DF
• HS Code：8437800000
• Production Capacity：2-8.5t,H

=== Description ===
25Screen  wide8Feeding dail17Shaft base for feedingScreen  narrow9Fixed deck support18Bearing 6226 
2.4. Noise Condition
Operation noise of the whole machine is less than 85 decibels.

Chapter III  Installation
3.1. Handing and Installation Safety Matters
 3.1.1 When handling, please select appropriate lifting tool according to equipment lifting location plan and equipment weight to prevent personnel injury or equipment damage.
3.1.2 Pay special attention to the lifting position and direction of the main body of equipment.
3.1.3 Equipments are not allowed to stack.
3.1.4 Choose appropriate installation position according to installation location drawing; pour
appropriate concrete foundation according to the total weight of equipments.
3.1.5 Lift in strict accordance with lifting chart; find out the position of the center of the gravity and lift levelly; it is not allowed to lift unevenly on front, back, left and right so as to prevent equipment rollover that may result in personnel or equipment damage.
3.1.6 During the lifting, no person is allowed to stand under lifting machine and equipment in order to avoid the accident of endangering the safety of personnel.
3.1.7 Please do not operate of the equipment is damaged or missing parts.
3.1.8 Do not place heavy objects on the equipment.
3.1.9 After concrete foundation is solid, place 8 sizing block on the foundation according to the installation diagram; place the device smoothly on the sizing block and adjust the equipment level through the sizing block.
3.2. Handling and Installation Procedures
3.2.1. Select Appropriate Handling Equipment
   The following guidelines should be strictly followed to lift the equipment properly and safe
Use equipment with sufficient lifting capacity;
Wrap all sharp edges;
   Check the safety devices attached at lifting hook;
Do not move the load before effective lifting;
Pay special attention to the lifting position and direction of the main body of equipment.
3.2.2.  The work before lifting
  Make sure the security clamp to fix the sieve ship and frame have been properly installed before lifting;
 Ensure that all personnel are safety away from the equipment;
 Make sure the load does not swing after being lifted;
  Make sure all parts that may fall are safely positioned;
   Lift vertically to prevent the collision with nearby objects.
3.2.3. Move
Always use rod, lever and hook to lift and move equipments and never use hand.
  The person responsible for moving and lifting should
 Know the destination of equipment hanging and shifting clearly;
  Stand at the position which can be easily viewed by crane operator when directing;
  Stop the operation immediately if dangerous situation occurs (e.g. someone passes by)
3.2.4. Place machine
Before the machine is put in place properly, make sure that the ground is level and has sufficient strength to support the equipment. The machine shall not be placed near the following locations.

• Exit;
• Fire fighting equipment;
• Access;
• Power line;