Carbide Cutter for Cutting Paper Board

• Classification：Single-blade Cutter
• Driven Type：Electric
• Type：Living Paper Cutting Machine
• Blade Material：Tungsten Carbide
• Computerized：Computerized
• Composition：8% Co and 92% W.C

=== Base Info ===

• Application：Paper Industry
• Color：Sliver
• Character：High Hardness and Wear Resistance
• Function：Cutting Paper Board
• Surface：Grind
• OEM：Acceptable
• Transport Package：Standard Packing
• Specification：Customed
• Trademark：Sunrise
• Origin：China
• Production Capacity：1 Tons,Month

=== Description ===
1) Application: it used for paper, tobacco, rubber, plywood, hardwood, PCB, PVC, stainless steel, high manganese steel and PCB, PVC electronic circuit boards and and lamp tube, fiber cement board and other materials industry.

2) Grade No: YG6A, YG8A, YG8X, YG8, YG10X, YS2T so on.
     YG8 and YS2T are widely used for making carbide cutting disc. But other size can be offered by your requirement.
Grade properties:
    YG8: High strength in use, impact and shock resistance higher than YG6, but wear resistance and cutting speed comparatively lower. Roughing of cast irons, non-ferrors metals and their alloys as well as non metallic materials at low cutting speed.
    YS2T: Fine grade alloy, with high wear resistance, high bending strength, high resistance to bonding, high thermal strength. Machining of refractory alloys, stainless steel and high manganese steel, etc.

3) Advantage:
These products require high precision, no glitches, no indentation phenomenon, so a larger cut of difficulty, To solve this problem, we have static pressing, HIP sintering greatly improve the physical properties of the product, polishing plating, so that when the blade cut, easy to wear and does not stick powder, reducing friction when cutting, greatly improving the accuracy and speed slitting, tool life extended, success for the user to save a lot of manpower and financial resources.

4) High precision circular disc cutter, round-cut blades (high wear / sharp / stainless)
1, Tolerance: High Availability to diameter (± 0.01) * Thickness (± 0.005) * inner diameter (H7) * balance (± 0.005)
2, Hardness: HRC64 ° ~ 66 ° And HRC68 ° ~70 °
3, Features: Cutting blade requires precision diameter, thickness, straightness, etc. Customized are also welcomed!

5) Ways to identify good carbide disc cutter.
1. Sound checking: Before installing the blade, hang the blade with fingers. Gently knock with a wooden hammer, listen to sounds, it is cracked if muddy sound, prohibited to use if cracked, in order to avoid accidents!
2. Running speed: Make sure the cutting speed is in or below 4800 rev/min.
3. Blade install: When installing, rotating shaft and blade center requires accurate alignment of the blade, clean the mechanical mounting surfaces, no cutting material, dust or other debris to be left on blades.
4. Install protective devices: You must install the protective cover (blades should baffle around the studio, steel, rubber and other protective equipment) before the blade running.

1  continuous production of carbide circular tissue paper cutter over 10 years.

2  total production quantity of carbide circular tissue paper cutter up to 150 tons.

3  widely exported to Europe,America,Australia, Brazil, India, Russia etc.

4  We, Sunrise carbide circular tissue paper cutter , promise you the 100% raw material.

5  We, Sunrise carbide circular tissue paper cutter , quotation your order with 24 hours.

6  We, Sunrise carbide circular tissue paper cutter  , accept your order as per your requirements.