Zech Industry Limited / 2022-06-23
=== Base Info ===
=== Description ===
The laser cutting material and speed.
Firstly.The proper speed of the laser cutting machine can not only improve the quality of the slit.Also the slit is narrow and flat.And the deformation of the slit can also reduce.
Secondly.If the cutting speed is too fast, the cutting line energy will be lower than the require amount. If the slit is blown through the slit, the material cannot blow off quickly.Which will cause a large amount of back drag, affecting the slit. The completeness of the situation may even occur if need secondary processing.
Thirdly.If the speed of the laser cutting machine is too low, the cutting position will expose to the high temperature of the laser for a long time.Which not only causes the cutting seam to become large, but also may affect the appearance of the slit due to too much heat conduction. The phenomenon of hanging slag appears on the back of the metal.
Therefore, the cutting speed will affect the cutting quality, not only from the cutting speed.I hope everyone should be careful when operating the metal laser cutting machine.
New product
Hot product
2022-06-23
2022-06-23
2022-06-23
2022-06-23
2022-06-23
2022-06-23
2022-06-23
2022-06-23
2022-06-23
2022-06-23