Good Quality Original Raw Material Tungsten Cemented Carbide Bar
Happybox Limited / 2022-07-04
- After-sales Service：Online or Site
- Certification：ISO 9001:2008
- Standard：AISI, BS, JIS, GB
- Surface Treatment：Blank
- Manufacturing Process：Sintering
- Material：Wc+Co
=== Base Info ===
- Model NO.：standard
- S.T.R.：1800 - 2000MPa
- Density：14.90g,cm3
- Grain Size：1.0 - 1.6um
- Type：Dome,Ballistic,Rectangle
- Usage：for VSI Crusher Rotor Tip
- Transport Package：Standard
- Specification：Hardness: 90.5 - 91.0HRA
- Trademark：Myloo
- Origin：Zigong, China
- HS Code：820900
- Production Capacity：400-500tons,Year
=== Description ===
The Ultimate Crushing Solution
VSI Crusher are unique due to its crushing process. Whereas most other type of crusher use metallic parts to
crush, VSI uses the rock fed into the machine to crush itself. This crushing process produces the best shaped
aggregates. The high velocity impact crushing achieved in VSI improves the shape of stone, reducing product
moisture and thus easing the screening operations. With rock-on-rock crushing action there is advantage of
cost savings, durability and unmatched performance in variety of crushing tasks.
We provide carbide bar well welded rotor bits as a set of wear part to make sure overall quality is
superior to most competitors.
Q&A:
1. Why You Say Your Tungsten Carbide Bars Have Much Better Performance?
-Coarse enough of grain size to be favorable for welding, especially in cold weather.
- Lower Cobalt without broken, longer wear-resistance.
We never stop finding better grade with much longer wear-resistance to save clients' cost. Now we are testing
new grade with coarse grain size for Europe market, it works well. Also we are making another 3 kinds of new
grade to test and compare with current grade. If it goes well, next step we will try to test it for America market first.
2.How You Control the Quality of The Carbide Bars?
-Much strict control on scrap carbide to ensure stable quality of carbide powder.
All is from qualified carbide rods with grain size 0.8-1.0um, like end mill, reamer, drills. Other carbide
manufacturers usually use carbide drill bits or anvil with grain size 1.2/1.6/2.0 mixed.
-Our special creative sintering process to ensure uniform grain size 2.4um.
Carbide manufacturers usually sinter it by Intermediate Frequency Furnace with temperature 1500ºC, that the
heat-difference can be 70-80ºC causing non-uniform grain size. We use Vacuum Sintering Furnace with "secret"
temperature without heat-difference to ensure uniform grain size 2.4um.
3.Do You Accept OEM&ODM?
Yes, for sure, we can cutomize the grade and shape upon your drawings or samples. Such as, make the grain coarse or add
more cobalt to increase its hardness. Make balance on hardness and toughness.
New product
Hot product
- Gm Candi Interface
2022-06-23
- Scan Dash V2.0 for BMW
2022-06-23
- K+Can Commander 2.0
2022-06-23
- Mut-3 Professional Diagnostic Tool Mut3
2022-06-23
- CKM-100 Key Programmer for Benz/BMW
2022-06-23
- Fuel Injector Tester & Cleaner (MST-N6A)
2022-06-23
- Mst 9000+ Plus ECU Simulator
2022-06-23
- OBD Ii Code Reader Mst-300, OBD2 Code Scanner
2022-06-23
- Digital Battery Analyzer (SC-100)
2022-06-23
- VAS5052A PC VERSION with VAS5054A Wireless Bluetooth Communicate
2022-06-23