Printing Ink Drying Tunnel Equipment

• Feature：Easy to Use
• Transport Package：Plywood
• Specification：2700X1170X1020mm
• Trademark：Tamprinter
• Origin：China(Mainland)

=== Base Info ===

• Model NO.：TM- IR-T800
• Production Capacity：100sets,Month

=== Description ===

Model

TM- IR-T800

TM- IR-T600

TM- IR-T400

Heating length

1500mm

1500mm

1500mm

Belt width

800mm

600mm

400mm

Speed

1-15meter/minute

1-15meter/minute

1-15meter/minute

Total power

quartz heat lamp, 1Kw*8pcs.380V 3phase

quartz heat lamp, 1Kw*8pcs.380V 3phase

quartz heat lamp, 0.5Kw*8pcs.380V 3phase

G.W/CBM

300KG/3.22CBM

225KG/2.67CBM

150KG/2.12CBM

Plywood Dim(mm)

2700X1170X1020

2700X970X1020

2700X770X1020

Celsius adjustable

RT~260

RT~260

RT~260

Teflon Belt hole

4*4mm

4*4mm

4*4mm

(A) Parameter

1, Running direction can be converted.

2, Internal circulating fan ensures uniform temperature.

3, 4 legs transport removable, saves a lot of space CBM.

3, Lot stock Optional width:0.4 / 0.6 / 0.8m,

4, RT~260 Celsius adjustable.

5,Teflon Belt hole 4*4mm.

6, 8 pcs quartz heat lamp,0.5kw*8pcs or 1Kw*8pcs.

7, our such stock garment dryer like photo all 2.5m length 

(B) The working characteristics of the tunnel oven drying line:

1: The use of unique PID high temperature control technology, control the temperature is accurate, and equipped with over-temperature protection function, when the temperature reaches the set temperature will automatically stop heating, and send an alarm to avoid overheating caused by the loss to the user.

2: Low running noise, rapid heating of drying line, use of forced ventilation, with split air device, fan blade adjustment, so that the upper and lower temperature difference is in the best state, even drying, can increase the smoke outlet, or increase the humidity exhaust fan The drying rate of the material is faster. The insulation layer of the box adopts silicon-aluminum composite insulation material, which has good heat preservation performance, high thermal efficiency of the whole machine, and energy saving and energy saving.

3: The unique timing method of the tunnel oven drying line and the use of digital display time relays provide high time control accuracy.

4: Quartz wave heating tube heating, high temperature, long life. Hot air circulation is used to make the upper and lower temperatures more uniform and ensure the quality of the oven products.

5: The tunnel pattern drying line is a continuous drying equipment that can be continuously baked without interruption to improve product production efficiency. Chain driven Teflon mesh belt transmission, strong high temperature, stable transmission, to solve the phenomenon of deviation during transportation.

6: The oven of the tunnel oven drying line (8 lamps can be set as the main body is divided into 2 sections heating), to ensure that the work is in a constant temperature state, independent electrical box control, easy operation. The structure is mainly composed of two parts: a conveyor system and a drying furnace.

(C) Oven sheet structure:

      (1) Shell material: Q235 cold-rolled carbon steel plate for baking box is used for welding. Local grooved steel plate is strengthened (surface dusting treatment)

     (2) Liner material: The inner surface of the drying box can be made of SUS304. The stainless steel plate is made by bending and welding.

    (3) Reinforcement material: Adopt Q235 cold-rolled carbon steel, angle steel, and channel steel welded up and down into a frame structure, which is sturdy and durable, and its service life is significantly improved!

(D) furnace structure:

1. The skeleton adopts: square steel structure; 2. Worktable selection method: long worktable; 3, flow channel requirements: bilateral flow channel; 4. Speed setting: optional ordinary governor or inverter ;

5, the box color, white computer, or customized

(E) hot air circulation system:

(1) Wind transport mode: This machine adopts simple air blower. Of course, it can also use strong pressure hot air circulation. Both sides are equipped with detachable movable air baffle plate. The hot air is evenly blown out from both sides of the air duct plate, using the top blower Suction hot air recovery, back and forth circulation, hot air circulation, even temperature inside the box, energy saving, more suitable for high-precision products

(2) Blower motor: The special high-temperature long-axis motor for the drying oven is used to support the fan blades.

(3) Installation position: The center of the oven is at the top, convenient for maintenance and stable in the wind.

(6) Heating element: tamprinter adopts the conventional consumable medium-wave quartz heating tube, which can be easily found in most countries and can be easily replaced. It can also be heated by stainless steel SUS304 tube-covered tubular nickel heating wire heating tube and continuously used. Life expectancy of 40,000 to 60,000 hours or more (quality assurance, on-site inspection, one-year replacement)

(F) Heating element: tamprinter adopts the conventional consumable medium-wave quartz heating tube, which can be easily found in most countries and can be easily replaced. It can also be heated by stainless steel SUS304 tube-covered tubular nickel heating wire heating tube and continuously used. Life expectancy of 40,000 to 60,000 hours or more (quality assurance, on-site inspection, one-year replacement)

(G) Insulation: Filled with high-grade aluminum silicate wool, when the oven reaches 200°C, the surface of the box does not exceed 10°C.

(H) Warming time: The time for heating the air furnace from room temperature to 150°C is not longer than 35 minutes. The heating time can be adjusted by increasing or decreasing the heating power.

(I) Intake and exhaust system: Intake system: Adjustable flow intake valve

Exhaust system: Wet blower can be equipped to speed up the drying rate

(J) Oven control flow chart:

Remark: The temperature controller set value is T1, the actual measured value T2

      Overheat protector set value is Ta, actual measured value is Tb

      Timer is set to t, timer is t0

      After the temperature of the studio rises to the temperature control table setting value T1, the timer starts counting as t0.