Gravity Extraction Concentrator Machine Price Mine Gold Recovery Centrifugal Concentrator ...

• After-sales Service：Send Installation Engineer at Site
• Warranty：One Year Except Wear Parts
• Model：Stlb20,30,60,80,100
• Feeding Size：<6mm
• Application：Gravity Separator
• Suitable Material：Gold, Chrome, Manganese, Tin etc

=== Base Info ===

• Model NO.：STLB
• Recover Rate：>95%
• Work Flow：Design by Xkj
• Techncial Support：Supply
• Company Experience：Over 25 Years
• Transport Package：Export Standard Package
• Specification：STL
• Trademark：XKJ
• Origin：Zhengzhou City, Henan Province
• HS Code：8474100000
• Production Capacity：50 Sets One Month

=== Description ===

Brief introduction of gold centrifugal concentrator  :

Gold centrifugal concentrator is an important gravity beneficiation equipment developed by our factory. It is proved by experienced practices that this equipment is high efficient for recovery of placer gold, rock gold, lode gold and monomeric gold in multi-metal ore. It had earned high reputation for replacing mercury plate or any toxic chemical, removing the chemical harm to human body and conductive to environmental protecting.

Application shows that the recovery rate can be as high as 90% in tin ore, chrome ore, antimony ore, manganese ore, gold ore,etc.especially for the case less than 2.5mm heavy ores, can reach to 92%.

Note: The standard slurry density in feeding is 35%, The water pressure level in separation process is 0.03-0.06Mpa. This figure is only for your reference, for example: named the water pressure as A=0.02mpa, B=0.03mpa, C=0.04mpa, and then testing these three figures to check the gold concentration grade, delete the lowest grade matched figure, and then text again to choose the most suitable water pressure figure.

Working principle  of gold centrifugal concentrator  :

(1).Central transmission shaft is driven by motor through belt, and then make the inner concentrate cone rotate in high speed.

(2).Fluidization water is introduced into the concentrate cone through central transmission shaft, and then spraying water to ring groove from inner cone holes, called backwash water. The water pressure level in separation process: 0.03-0.06Mpa.

(3).ineral materials enter into the inner cone groove by feeding pipe, under the high rotating configuration force, heavy ores will be deposited on the groove but the light ores will go upside along the cone liner, and finally going into tailing discharging pipe from cone upper surroundings.During the separation process, make sure the concentration discharging pipe is closed.

(4).After a cycle process, close down the machine and open the concentration pipe to collect the gold concentration.


Technical Parameters of gold centrifugal concentrator  :

Type

20

30

60

80

100

Capacity (T/h)

0.2-1

2-8

10-40

35-70

75-120

Particle size (mm)

0-3

0-4

0-6

0-6

0-6

Feeding Concentration(%)

0-50%

0-50%

0-50%

0-50%

0-50%

Backwash water(T/h)

1.5-2

4-6

10-15

17-25

40-60

Output (KG/TIMES)

2-3

10-20

30-40

60-70

70-80

Power (kw)

0.75

1.5

4

15

18.5

Revolution (r)

800

600

460

400

360

Pressure Water (Mpa)

0.04

0.12

0.4

0.4

0.6

Dimension (mm)

930*700*900

1180*1140*1250

1970*1670*1750

2300*1800*2200

2500*2000*2400

Weight (kg)

205

400

1300

1500

2000

Types of Gold Ore

Gold exists in quartzite. Usually, quartz appears as small stones in large cracks in riverbeds or mountain slopes and has crystals in different colors such as white, yellow, pink, purple, gray, or black. The most common types of quartz with gold ore are rose quartz gold ore and rainbow gold ore. A high gold-quartz ore contains 25% gold by mass, and it occurs in areas where the bedrock is fractured by tectonic and volcanic activity.

Flow chart of gold ore processing

Customer Mine Site: 

Tanzania client in our workshop to check Centrifugal Gold Separator

FAQ: 

1. Are you manufacture or trading company?

We are factory, established in 1996.

2. How long is your delivery time?

7-10 days for the stock, 15-30 days for the mass production.

3. What is your payment method?

30% deposit in T/T advance, 70% balance before shipment.

4. How long is the warranty? Does your company supply the spare parts?

One year. Spare parts for you at lowest cost.

5. If I need the complete crushing plant can you help us to build it?

Yes, we can help you set up a complete production line and give you related professional advice. We had already build many mining projects in China & Overseas.

From factory establishment, we have been insisting manufacturing full set of beneficiation equipments. With over 20 years' experience, we still enjoy this advantage to give the clients mature workflow, reasonable design, accurate manufacture, best after-service.  If you want to beneficiation ferrous ore or non-ferrous ore, you are luck to choose me- the right one.

Henan Xing yang Mining Machinery Manufactory is a mining machinery manufacturer .The leading products include whole set mine-selecting equipment and sandstone equipment, such as ball mills, crushers, grinders, magnetic separators, flotation machines, classifiers, driers, sand-makers, vibrating screens, sand washers, conveyors and so on.