Water for Injection Steam Heating Tube Type Multi-Effect Distilled Water Machine

Shenzhen Source Pack Co., Ltd / 2022-07-05

Water for Injection Steam Heating Tube Type Multi-Effect Distilled Water Machine

  • Condition:New
  • Customized:Customized
  • Voltage:220V,380V
  • Composition:Water Treatment Equipment
  • Processing Material:Pure Water,Deionized Water
  • Process:Distillation

=== Base Info ===

  • Model NO.:LD
  • Application:Water for Injection,Infusion,Blood Products
  • Material:SUS304, SUS316L
  • Efficacy:5,6
  • Heating:Steam
  • Warranty:1 Year
  • Support:Customized
  • Transport Package:Wooden Case
  • Specification:200-5000L,H
  • Trademark:Wentong
  • Origin:China
  • HS Code:84195000
  • Production Capacity:3000pieces,Year

=== Description ===

Basic Info.

Model NO. LD Application Water for Injection,Infusion,Blood Products Material SUS304, SUS316L Efficacy 5,6 Heating Steam Warranty 1 Year Support Customized Transport Package Wooden Case Specification 200-5000L/H Trademark Wentong Origin China HS Code 84195000 Production Capacity 3000pieces/Year

Product Description

Distilled water machine introduction
The tube-type multi-effect distilled water machine is a device that uses deionized water as the raw material water to prepare water for injection by heating with steam. It has the advantages of reasonable structure, simple operation, high thermal efficiency, low energy consumption, and automatic detection of water quality for injection. The injection water produced by this machine is stable in quality and high in purity. The quality of the effluent water meets the requirements of the Chinese Pharmacopoeia, European Pharmacopoeia, and United States Pharmacopoeia, and the "water for injection" regulations.
The machine can also produce high-purity steam for sterilization and disinfection. It is manufactured by hospitals, pharmaceuticals, electronics, food and beverage industries.


Work principle
Qualified raw material water is boosted by a multi-stage pump and enters the condenser for heat exchange, and then enters each effect preheater in turn, and then enters an effect evaporator and is sprayed on the inner wall of the heating pipe through the material water distributor, so that the material water forms a film in the pipe It flows like a stream and is heated and vaporized by steam from the boiler.

The generated secondary steam entrained with water droplets enters the steam-water separation device from the lower end of the heating tube, the separated pure steam enters the next effect as heating steam, and the raw water that has not evaporated enters the next effect, and the above process is repeated.

The pure steam produced by the final effect enters the condenser to condense and condense the condensate water from each effect except the first effect. After removing the insoluble gas, it becomes water for injection, and the temperature can reach 92 ~ 99 ºC.

Specification
ModelDistilled water output L/HSteam consumption Kg/HPure water consumption L/HDimention L x W x H (mm)Net weight(Kg)
LD200-3>200752301000*800*2000250
LD300-4>300903301100*800*2200450
LD500-4>3001605601300*900*2500720
LD500-5>3001355601800*900*2500850
LD500-6>3001125601900*900*2500900
LD750-5>3001908401700*1000*29001100
LD1000-5>30026811002100*1100*31001800
LD1000-6>30022011002200*1100*31001900
LD1500-5>30040516702500*1300*34002100
LD2000-5>30052522003000*1300*34002700
LD3000-5>30079033003500*1500*38003500
LD4000-5>300104044004000*1500*38004700
LD5000-5>300130055004100*1700*42005200

Options & Accessories
  • Plant steam pressure regulating valve
  • Feed water conductivity monitoring
  • Pure steam take from the first column
  • Elevated WFI condenser
  • Hot standby mode
  • Hot water sanitization of feed water pipes
  • Online TC monitoring device
  • WFI loop skid

 

Copyright 2024 357th.com All Rights Reserved