50*150cm Two Layers Safety PP Dunnage Bag

SINOTOP PACKAGING MACHINERY CO., LTD. / 2022-06-09

50*150cm Two Layers Safety PP Dunnage Bag

  • Layer:Multi Layer
  • Color:Brown
  • Scope of Application:Container and Transporation
  • Material:Kraft Paper
  • Funcation:Protection
  • Pringting:Single Color, Two Colors, Four Colors

=== Base Info ===

  • Specification:FREE OPTION
  • Transport Package:Carton
  • Logo Printing:Available
  • Size:Customized
  • Brand:Stm
  • Package:Carton
  • Dimension:Various
  • Pattern:Pneumatic
  • Seal:Heating
  • OEM:Acctable
  • Model NO.:50*150cm
  • Trademark:STM
  • Origin:China Suzhou
  • HS Code:48194000
  • Production Capacity:20ton

=== Description ===

Basic Info.

Model NO. 50*150cm OEM Acctable Seal Heating Pattern Pneumatic Dimension Various Package Carton Brand Stm Size Customized Logo Printing Available Transport Package Carton Specification FREE OPTION Trademark STM Origin China Suzhou HS Code 48194000 Production Capacity 20ton

Product Description

PRODUCT NAME

DUNNAGE BAG/ CARGO AIR BAG/ INFLATABLE AIR BAG/ CARGO SECURING DUNNAG BAG



Loading Tips:
Clean the floor of the trailer and inspect floors, walls and roof for nails or holes before loading.  Remove or hammer down nails or other sharps.
Load skids tight from front to back and from side to side.  Tight means touching.
Use side shifters on the fork lift to position freight in firm contact with the sidewall or other skid of freight.  Also to control void size.
Alternate the void from side to side to balance the load.
Put tallest freight in the nose at the first load position and bag it.
Put the most fragile freight towards the nose for the softest ride.
Use additional bags when necessary to stabilize unsteady skids.
Always bag when dropping from two high to one high loading.
Always bag the final load position.
Techniques for Easy Installation:
Insert inflation tool into valve.
Visually locate the best void to install the bag while walking in.
Give the bag a small puff of air to give it some stiffness and bulk.
Insert bag all the way into the void before inflating. Valve should be at top if possible. One hand should be on the inflation tool and one hand should be positioning the bag.
If bagging a high load position, you may tape the bag to the top of one unit before loading the other side.
When inflating, watch the freight not the bag. 1 – 3 lbs psi recommended. When the freight is tight against the wall, disengage the inflator. Don't worry, the bag will not over-inflate!  Installation is complete when the inflator blows back. 
After inflation, screw on over-cap.
Deflation (Patented walk-away feature):
Remove over-cap, push valve in and twist one quarter turn clockwise.
You can walk-away while bag deflates!
Remove bag, inspect for damage and set aside for reuse.
OUR PRODUCTION RANGE

SIZE    (cm)

MATERIAL(cm)(Mpa)
050*100
PE/PP+KRAFT250.06≤3.5T
050*150
PE/PP+KRAFT250.06≤3.5T
060*100
PE/PP+KRAFT280.06≤3.5T
060*120
PE/PP+KRAFT280.06≤4.5T
060*150
PE/PP+KRAFT280.06≤4.5T
080*120
PE/PP+KRAFT380.06≤4.5T
080*160
PE/PP+KRAFT380.06≤4.5T
080*180
PE/PP+KRAFT380.06≤4.5T
090*120
PE/PP+KRAFT450.06≤4.5T
090*180
PE/PP+KRAFT450.06≤4.5T
100*120
 PE/PP+KRAFT500.06≤4.5T
100*160
 PE/PP+KRAFT500.06≤4.5T
100*180
PE/PP+KRAFT500.06≤4.8T
100*200
 PE/PP+KRAFT500.06≤4.8T
100*220
PE/PP+KRAFT500.06≤4.8T
100*240
PE/PP+KRAFT500.06≤4.8T
120*120
PE/PP+KRAFT600.06≤4.8T
120*180
PE/PP+KRAFT600.06≤4.8T
120*200
 PE/PP+KRAFT600.06≤4.8T
120*220
 PE/PP+KRAFT600.06≤4.8T
120*240
 PE/PP+KRAFT600.06≤4.8T

Copyright 2024 357th.com All Rights Reserved