Lithium Battery Lab Research Electrode Coating Machine Coater Gn-360

• After-sales Service：Yes
• Warranty：Yes
• Type：Roll Coater
• Driven Type：Mechanical
• Automatic Grade：Semi-Automatic
• Packaging Material：Wood

=== Base Info ===

• Model NO.：GN-360
• Packaging Type：Cartons
• Application：for Battery Electrode Coating
• Coating Method：Intermittent Coating
• Substrate Width：100-360mm
• Max Wet Coating Thickness：80-400um
• Coating Speed：0.5-1.5m,Min
• Oven：1.5m,Section*3 Section
• Oven Temperature：Room-150c
• Transport Package：Export Standard Package
• Specification：effective coating width 300mm
• Trademark：Gelon
• Origin：China

=== Description ===

Basic Info.

Model NO. GN-360 Packaging Type Cartons Application for Battery Electrode Coating Coating Method Intermittent Coating Substrate Width 100-360mm Max Wet Coating Thickness 80-400um Coating Speed 0.5-1.5m/Min Oven 1.5m/Section*3 Section Oven Temperature Room-150c Transport Package Export Standard Package Specification effective coating width 300mm Trademark Gelon Origin China

Product Description

Lithium Battery Lab Research Electrode Coating Machine Coater GN-360

I . Equipment specifications:
1, Substrate thickness: aluminum foil: 0.012--0.030mm copper foil: 0.008-0.030mm
2, Substrate width:aluminum foil:100-360mm  copper foil:100-360mm 
3, the maximum coating wet thickness:80--400µm (under the viscosity of the slurry allows)
4, the maximum coating width: 300mm,the maximum roller width:360mm
5, Mechanical traveling speed: 0.5-7M/min (maximum speed)
6, Coating speed: 0.5-1.5M/min (the speed is different according to the size of the slurry, this parameter is only based on the 4m oven length and the coating requirements of the lithium battery, a range is for reference) (super capacitor can coat faster, usually can set about 2M/min).
7, Total length of the machine: 1.5 m × 3 section oven = 4.5 m
II. Equipment performance
1, coating method: Transferred intermittent coating
Intermittent coating distance: 5-8000mm ± 1mm (according to battery specifications).
2, coating accuracy:
2.1. Dry thickness accuracy error: single-sided cathode: ±2.5μm  anode ±2.5μm (cross-section measurement 4-5 points, vertical section measurement spacing is 100mm).
2.2, the front and back coating alignment error: ≤ ± 1.0mm
2.3, average length error: ≤ ± 1.0mm
2.4, average width error: ≤ ± 1.0mm
Note: The above indicators 1 and 2 should be the best when the slurry conditions (viscosity, particle size, uniformity, etc.) match the settings of the various parameters of the equipment.
3, core diameter: 3 inches with air shaft
4, tension control: sprocket tension, counterweight constant tension
5, Correction controller accuracy: ±0.01mm; Correction accuracy: ±1mm
6, the operator operates the coating mechanism from the front
7, drying form:
7.1. hot air drying: hot air circulation (upper air supply);
7.2. Heating method: electric heating 6KW × 3 segments = 18KW;
7.3.heater;
8, oven length: 1.5M / section × 3 section (total 4.5M)
9, oven material: both inside and outside are made of stainless steel
10, oven temperature: room temperature - 150 ° C, two section can be independently adjustable, temperature control accuracy < ± 5 ° C;
I . Equipment specifications:
1, Substrate thickness: aluminum foil: 0.012--0.030mm copper foil: 0.008-0.030mm
2, Substrate width:aluminum foil:100-360mm  copper foil:100-360mm 
3, the maximum coating wet thickness:80--400µm (under the viscosity of the slurry allows)
4, the maximum coating width: 300mm,the maximum roller width:360mm
5, Mechanical traveling speed: 0.5-7M/min (maximum speed)
6, Coating speed: 0.5-1.5M/min (the speed is different according to the size of the slurry, this parameter is only based on the 4m oven length and the coating requirements of the lithium battery, a range is for reference) (super capacitor can coat faster, usually can set about 2M/min).
7, Total length of the machine: 1.5 m × 3 section oven = 4.5 m
II. Equipment performance
1, coating method: Transferred intermittent coating
Intermittent coating distance: 5-8000mm ± 1mm (according to battery specifications).
2, coating accuracy:
2.1. Dry thickness accuracy error: single-sided cathode: ±2.5μm  anode ±2.5μm (cross-section measurement 4-5 points, vertical section measurement spacing is 100mm).
2.2, the front and back coating alignment error: ≤ ± 1.0mm
2.3, average length error: ≤ ± 1.0mm
2.4, average width error: ≤ ± 1.0mm
Note: The above indicators 1 and 2 should be the best when the slurry conditions (viscosity, particle size, uniformity, etc.) match the settings of the various parameters of the equipment.
3, core diameter: 3 inches with air shaft
4, tension control: sprocket tension, counterweight constant tension
5, Correction controller accuracy: ±0.01mm; Correction accuracy: ±1mm
6, the operator operates the coating mechanism from the front
7, drying form:
7.1. hot air drying: hot air circulation (upper air supply);
7.2. Heating method: electric heating 6KW × 3 segments = 18KW;
7.3.heater;
8, oven length: 1.5M / section × 3 section (total 4.5M)
9, oven material: both inside and outside are made of stainless steel
10, oven temperature: room temperature - 150 ° C, two section can be independently adjustable, temperature control accuracy < ± 5 ° C;