Fabric Core Conveyor Belt Vulcanizing Machine

• Type：Vertical Conveyor
• Structure：Roller Conveyor
• Material：Carbon Steel
• Material Feature：Heat Resistant
• Certification：ISO9001:2008, ISO9001:2000, CE
• Energy Saving：Energy Saving

=== Base Info ===

• Model NO.：XLB-Q1400x5700x90mm
• Warranty：2 Years
• Color：Multi Color
• Customized：Customized
• Condition：New
• Colour：All Colour
• Application：Making Rubber Belt
• Name：Rubber Belt Vulcanizing Press
• Types：Frame
• Roller Material：Chilled Alloy Casting
• Gear Box：Zsy Teeth-Harded
• Bush：Single,Double Bearing
• Combination：3 , 6 Mill One Line
• Power(W)：15-55kw
• Voltage：380V,220V,450V
• Transport Package：Wooden Cases or as Your Needs
• Specification：CE,ISO
• Trademark：Guabgyue
• Origin：Shandong, China
• HS Code：8477800000
• Production Capacity：10sets,Month

=== Description ===

Basic Info.

Model NO. XLB-Q1400x5700x90mm Warranty 2 Years Color Multi Color Customized Customized Condition New Colour All Colour Application Making Rubber Belt Name Rubber Belt Vulcanizing Press Types Frame Roller Material Chilled Alloy Casting Gear Box Zsy Teeth-Harded Bush Single/Double Bearing Combination 3 / 6 Mill One Line Power(W) 15-55kw Voltage 380V/220V/450V Transport Package Wooden Cases or as Your Needs Specification CE/ISO Trademark Guabgyue Origin Shandong, China HS Code 8477800000 Production Capacity 10sets/Month

Product Description

textile core rubber belt making machine
 
 
textile core conveyor belt hydraulic press is applied to manufacturing of transmission rubber belt, conveyer rubber belt
 



1. Model:
 
Made according to customer requirements.
 
2. Performance introduction:
 
1). It is controlled by PLC and touch screen for manual control and auto control. The auto control can realize many auto works such as mould closing, air exhausting, temperature control, vulcanization timing, alarming and discharging load when mould opening etc; the touch screen will timely show the temperature of the heating platen at each heating zone.
 
2) .The hydraulic cylinder is made of ZG270-500, the ram is made of close-grained chilled alloy cast iron by casting and fine grinding; the hydraulic cylinder is well sealed by YX shape sealing ring.
 
3).The guard edge of heating platen adopts hydraulic pressure automatic prop up iron, under the function of four oil cylinder, the iron cushion at two sides of the lower platen will advance and retreat at the same time; there are anti-superpose iron cushion device at the two sides of platen.
 
4) .There is a set of valve group of temperature adjuster on each heating area for the platen. Under the controlling of PLC, it can guarantee the even temperature of each heating area.
 
5) .Hydraulic pressure system: We adopt the famous brand hydraulic pressure station from the domestic and abroad, under the controlling of PLC, it can realize the auto mould closing, air exhausting and load discharging when opening mould.
 
6).The in-phase balance device of the machine: there is an axis that runs through the machine sets below the platform, gear wheels and racks are designed on the two sides of the axis, which can guarantee the horizontal lifting for the platform.
 
7).The guiding device for mould closing: it is designed on the two sides of the lower mat platform, there are guiding seats for the frame board and platform, the guiding seats is produced with incline and the incline distance can be adjustable by the prop up screw.
 
8) .Mould opening booster: during the mould opening, the four oil cylinder below the platform will start working and forcibly pull down the platform, which can prevent the mould from sticking.


1) The body use frame type, mainly consist of top crossing, plate, table, piston, hydraulic cylinder and frame. We put asbestos board between plate and top crossing, table, for its good heat insulation. Use polyurethane material sealing ring between piston and hydraulic cylinder with good sealing property. The piston material is chilled cast iron, hydraulic cylinder material is ductile cast iron, weldment between top and bottom crossing.


2) Put holder and oil cylinder at the side of plate, push-off and reseting moulds are finished by oil cylinder moving when using. There is not ejecting holder in manual ejecting mould structure, but still convenient when using.


3) Hydraulic system is consist of unipump, operating valve and control system.


4) Electric system is consist of oil pump motor and vulcanizing timing. When working pressure reach 22.1 mpa, electro connecting pressure gauge control, time relay on the faceplate is used for setting vulcanizing time. When reach the setting time, it will warn automatically, push TA button can remove warning.





We can also design and produce according to customer's requirement. If you are interested in our products or have any questions, please contact us freely. We will try our best to meet your requirement in the first time.



Contacts:
 
QINGDAO GUANGYUE RUBBER MACHINERY MANUFACTING CO., LTD
 
OFFFICE PHONE: +86-532- 86767598  FAX: +86- 532-86767598    
 
 Website:qdguangyue57.en.made-in-china.com
 
FACTORY  ADD:Huangshan econornic zone,jiaonan, Qingdao city, Shandong province,
 China.


RFQ:
 
1. Are you manufacturer?
 
   Yes, we are  CE SGS ISO  approved rubber products manufacturer in China.
 
2. Can you design new product for us?
 
    Yes,we have a professional development team that make new products according to your requirements.
 
3. How long is your guarantee?
   Two  year (Calculated from the equipment arrives at the customer's side.).
 
4. How to contact us?
 You can click 'send' now. 
 
If you want to know more information about our products welcome to contact us in any time, and welcome to our factory!

 We are Qingdao Guangyue Rubber Machinery Manufacturing CO.,LTD.Our main products are: various types of rubber mixer, rubber crusher, plate vulcanizer, rubber cutter, rubber extruder, rubber refiner and other kinds of rubber machineries. The products have been exported to many countries, such as America, Canada, Australia, South Korea, and Southeast Asia, Middle-east, etc .
If you are interested in our products mentioned above, kindly let us know by return e-mail.
Also we can make non-standard rubber machinery as customer's requirements. 
We are looking forward to receiving your inquiry sincerely, thanks!
 
Packaging:
Nude packing & Electricity box wooden splints packaging.
Shipping:
Delivery Port:QingDao Port
Price Term:
1. To be paid by T/T 30% of total amount in advance.
2. To be paid the balance by T/T 7 days before shipment.