Precision Slurry Feeding Pump Battery Equipment Lab Slot Die Coating Machine for Lab Research Gn-360s

Shandong Gelon Lib Co., Ltd. / 2022-06-27

Precision Slurry Feeding Pump Battery Equipment Lab Slot Die Coating Machine for Lab Research Gn-360s

  • After-sales Service:Online
  • Warranty:1 Year
  • Type:Blade Coater
  • Driven Type:Electric
  • Automatic Grade:Automatic
  • Packaging Material:Metal

=== Base Info ===

  • Model NO.:GN-360S
  • Packaging Type:Battery
  • Application:Electronics, Battery
  • Coating Width:< 300mm
  • Baseband Material:Copper Foil, Aluminum Foil, etc
  • Coating Methode:Slot Die Coating
  • Baseline Width:100-320mm
  • Mechanical Strip:0.5-7m , Min
  • Coating Speed:0.5-1.5m,Min
  • Oven Length:1.5-2m
  • Transport Package:Wooden Box
  • Specification:different size
  • Trademark:GELON
  • Origin:China
  • Production Capacity:20sets,Month

=== Description ===
Overview

Product Description

Detailed Photos

 

Precision Slurry Feeding Pump Battery Equipment Lab Slot Die Coating Machine for Lab Research Gn-360sPrecision Slurry Feeding Pump Battery Equipment Lab Slot Die Coating Machine for Lab Research Gn-360s

Product Parameters

NMP(Oily/DI-water( Water-based)Solid content (t%)(38~80±3)(35~65±3)
Proportion of slurry(g/cm3)
1.5~3.0
1.0~2.0Viscosity(cps)2000~200001000~10000BinderPVDF/Water-basedPVDF/SBR  
Intermittence coating or continuous coatingDensity of one side
coated surface (g/m2)
35~30035~300 
    1. Machine Parameters
 
Roll width500 mm
Effective coating width<380mm
Weight range of single coated film35~300g/m2

Power supply
380V x 50Hz,3 phase (control power supply 220 V x 50Hz, single phase) voltage fluctuation range 10%~-10% voltage fluctuation
range

Total power
Maximum 15KW (When electric heating, the normal working power is about 40% of the maximum starting power.) Control heating with a power amplifier.


Gas source
0.6MPa~0.8MPa, air pressure fluctuation ±1%(clean air after water removal, no oil, filtration, steady pressure, )compressed air consumption 0.5 m3/h; compressed air is divided into two ways one for coating valve, equipped with special gas storage tank (0.3 m3/h), the other way to feed pressure belt cylinder, clamping
cylinder and so on (0.2 m3/h).
Appearance ColorNickel plated nose, box part stainless steel, black or customer specified
Ground requirementsThe foundation is cement ground or terrazzo ground, flatness ±5
mm/m2, bearing capacity 1500kg/m2
Coating Part temperature23 ± 4ºC
Coating part humidity45%RH (No condensation)
 
    1. Oven Partial Parameters
Air duct structureUpper and lower air ducts
Drying oven1 ovens
Total oven length2m
Single oven length2m
Oven heat sourceElectric heating, hot air circulation structure
Single oven heating power10KW/2m
Oven temperatureMax150ºC, temperature difference Max150ºC±5ºC in single oven
Blow modeA hot fan provides air
Air circulation modeIndependent air volume control, up and down air volume through the valve control
Surface temperature outside the box≤50ºC
Oven materialsStainless steel, inner tank (SUS304 :1.0mm), housing (SUS201 :2.0mm)

Precision Slurry Feeding Pump Battery Equipment Lab Slot Die Coating Machine for Lab Research Gn-360sPrecision Slurry Feeding Pump Battery Equipment Lab Slot Die Coating Machine for Lab Research Gn-360sPrecision Slurry Feeding Pump Battery Equipment Lab Slot Die Coating Machine for Lab Research Gn-360sPrecision Slurry Feeding Pump Battery Equipment Lab Slot Die Coating Machine for Lab Research Gn-360sPrecision Slurry Feeding Pump Battery Equipment Lab Slot Die Coating Machine for Lab Research Gn-360s

Copyright 2024 357th.com All Rights Reserved