Ultraviolet Mask Disinfection Equipment
Shenzhen Bellaga Technology Co., Ltd. / 2022-07-05
- Customized：Non-Customized
- Certification：CE
- Scale：Medium
- Automation：Automatic
- Principle：UV Sterilize
- Structure：Tunnel
=== Base Info ===
- Model NO.：SJ-2000
- Operation：Continuous
- Energy：Heat Sterilization
- Property：Physical Sterilization
- Type：Induction Electronics Sterilization Equipment
- UV Working Area：1200mm
- Inlet Working Area：400mm
- Outlet Working Area：400mm
- Height of Inlet/Outlet：200mm(Can Be Adjustable)
- Width of Inlet/Outlet：500mm
- Height From Transmission Belt to Ground：750+,-50mm
- Transport Package：Non-Wooden Case
- Specification：Full length 2000MM
- Trademark：sUBIt
- Origin：China
- HS Code：8419899090
- Production Capacity：500,Year
=== Description ===
Equipment Parameter
| Full length | 2000mm |
| UV working area | 1200mm |
| Inlet working area | 400mm |
| Outlet working area | 400mm |
| Height of Inlet/Outlet | 200mm(can be adjustable) |
| Width of Inlet/Outlet | 500mm |
| Height from Transmission belt to ground | 750±50mm |
Equipment main structure
1. The outer body of the working area tunnel: a set of high-grade brushed stainless steel
2. The inner cavity of the working area tunnel: a set of mirror stainless steel plates
3. Body support frame: a set of Fangtong steel
4. Thermal insulation material: vacuum aluminum silicate + silk cotton double layer
5. Conveyor belt: Teflon mesh belt
6. Balance device: flat water cup
Equipment electrical parts
1. Main switch: 30A
2. Total power: 1.3KW
3. Range of inorganic belt speed regulation: 0-6m / min
4. Transportation motor: 800W
5. Governor: 50W
6. Ammeter: a set of 50A
7. Working voltage: 220V ± 5% three-wire system 50Hz
Sterilization device
1. Effective radiation of ultraviolet light source
Lamp length:600mm
2. 16pieces UV ultraviolet sterilization lamps, 20W each, UV lamps are installed in all directions up and down, left and right, 360 ° sterilization in all directions.
Protection device
1. Overvoltage and overcurrent protection
2. Fault alarm prompt
3. Equipment overload protection
Aftersale service:
1)Machine warranty period: 12 month, factory would supply spare parts on free in warranty time.
2) Technical supporting in lift time. Any problems happened, factory would response in 8hours via Email, instant message or phone directly.
New product
Hot product
- Gm Candi Interface
2022-06-23
- Scan Dash V2.0 for BMW
2022-06-23
- K+Can Commander 2.0
2022-06-23
- Mut-3 Professional Diagnostic Tool Mut3
2022-06-23
- CKM-100 Key Programmer for Benz/BMW
2022-06-23
- Fuel Injector Tester & Cleaner (MST-N6A)
2022-06-23
- Mst 9000+ Plus ECU Simulator
2022-06-23
- OBD Ii Code Reader Mst-300, OBD2 Code Scanner
2022-06-23
- Digital Battery Analyzer (SC-100)
2022-06-23
- VAS5052A PC VERSION with VAS5054A Wireless Bluetooth Communicate
2022-06-23