F6 80W/100W/130W/150W Laser Cutting Engraving Machine CO2 Laser Tube

• Customized：Non-Customized
• Standard Component：Standard Component
• Type：Glass CO2 Laser Tube
• Transport Package：Carton
• Specification：1800*340*350mm
• Trademark：EFR

=== Base Info ===

• Model NO.：F6
• Origin：China
• HS Code：8515809090
• Production Capacity：10000 Sets Per Month

=== Description ===
ModelInput Current (A)Max. Operating Current (mA)Max. Current in Long-Term OperationService LifeMatched EFR Power SupplyStarting VoltageF0822mA22mA and below20mA and below6000 hours (Operating current ≤ 20mA)T6014KVF022mA22mA and below20mA and below6000 hours (Operating current ≤ 20mA)T6016KVF228mA28mA and below25mA and below6000 hours (Operating current ≤ 25mA)ES80, F8019KVF430mA30mA and below28mA and below6000 hours (Operating current ≤ 28mA)ES100, F10024KVF630mA30mA and below28mA and below6000 hours (Operating current ≤ 28mA)ES150, F15028KVF830mA30mA and below28mA and below6000 hours (Operating current ≤ 28mA)ES150, F15030KVF1030mA30mA and below28mA and below6000 hours (Operating current ≤ 28mA)ES150, F15030KVThe above current should be in accordance with actual currents displayed on the ammeter, which is in a series connection with the cathode.
If used incorrectly for long period in over-current conditions, the CO2 laser tube 's negative electrode will change color, and the service life significantly decreased.

4. Technical Parmeters



5. Cleaning Tips: When cleaning the window of carbon dioxide laser tube, please do not use cotton swabs or other wipes as they will significantly affect out power.

The following methods are provided for cleaning the window:
4.1 When the lens is stained, turn off the laser tube.
4.2 Use an air dust blower to blow away dust and dirt on the lens.
4.3 Use a syringe to spray ethanol on the lens.
4.4 After the ethanol evaporates, turn the laser tube back on.
4.5 If the above method do not work effectively, professionals are required, who will use a cotton swab dipped in ethanol to clean the lens in a rotating fashion away from the center, outwards to the edge.


6. Special Notice:
5.1 Do not use acetone to clean the glass.
5.2 Do not move the two fastening screws on both ends of laser tube. Otherwise, the output power will decrease, and the laser tube will be scraped.
5.3 When testing the light spot on organic glass, please keep the organic glass 300mm away from the window.

7. Safety:
At the CO2 glass laser device generates invisible light, please wear eye protection gear when operating. A safety sign for high voltage is marked on the positive pole.

8. Storage and Transportation Requirement:
When storing and transporting the co2 laser tube, please drain the cooling liquid and cover the tubes ends with dustproof plastic bags. For storage, the required environmental temperature is 2-40 ºC and the humidity range from 10-60%.
Adhesive tapes and sponges should be used to fix the laser tubes and prevent sliding during transport. A 70mm sponge should be use at the end of the window, and a 50mm sponge should be at the end of the reflecting mirror fully.


9. Related Laser Machine Parts
9.1 Power Supply

9.2 Focus Lens

9.3 Reflective Mirrors

10. Contact Information

To be continued..