Conductive Foam Tape 700 Gap Jump Cutting Machine

• After-sales Service：Staff Training and Installation Guide
• Warranty：One Year
• Classification：Single-blade Cutter
• Driven Type：Mechanical
• Type：Industrial Cutter
• Blade Material：Metal

=== Base Info ===

• Model NO.：CQT-700
• Computerized：Computerized
• Control System：Servo Motor
• Characteristic：Final Products with Gaps
• Advantage：Save Material and Save Labors
• Certificate：CE ISO
• Blade：Blade or Simple Die
• Material：Can Feed Few Strips at The Same Time
• Principle：Change Release Liner for Reduce Raw Material
• Experience：Over 30 Years
• Raw Material：Can Be Sticky or Non-Sticky
• Transport Package：Wooden Box
• Trademark：CHUANRI
• Origin：China
• HS Code：844110000
• Production Capacity：300 Sets,Month

=== Description ===

Basic Info.

Model NO. CQT-700 Computerized Computerized Control System Servo Motor Characteristic Final Products with Gaps Advantage Save Material and Save Labors Certificate CE ISO Blade Blade or Simple Die Material Can Feed Few Strips at The Same Time Principle Change Release Liner for Reduce Raw Material Experience Over 30 Years Raw Material Can Be Sticky or Non-Sticky Transport Package Wooden Box Trademark CHUANRI Origin China HS Code 844110000 Production Capacity 300 Sets/Month

Product Description

Conductive Foam Tape 700 Gap Jump Cutting Machine

Application
This machine is sutiable for kiss cut tapes.
It is with two sets servo motors. One is used for drag tapes, the other one is used for drag release liner.
After cut, the final products will be with gaps automatically.

This machine also can use simple die, then do simple die cut. Then work together with the multilayer laminating machine to rewind the die cut wastage, than connect to the sheet cutting machine to cut the material into sheets.

Similar video:   http://youtu.be/5ybTj63ItFA

Technical data
Model: CQT-700
Feediing width: 700mm
Main power: 1.5kw
Cutting speed: 160m/min
Cutting precision: +/-0.1mm
Size: 2450*1800*1600mm
Voltage: 380V
Weight: 1000KGS
Total power: 5.5KW

The Detail

 1.If your mateiral surface hasn't release paper, whcih meaning: its sticky in the material surface:
 We will use five Shafts ( all the shaft need used .



 

 2.If the material surface has release paper, it isn't sticky, we only used five shafts, the put
 another shaft , its not used, in the drawing, its the third shaft ( not used ).

The Sample