Diamond Wire for Granite and Marble Block Trimming/Slab Cutting/Profiling

• Application：for Cutting Granite Slab
• Type：Multi Diamond Wire or Poly Wire
• Equipment Recommend：Pellegrini, Gaspari, Barsanti, Breton, Simec
• Reinforcement：Plastic and Steel Cable
• Beads Diameter：6.3mm,7.3mm or 8.4mm
• Type of Beads：Sintered or Free Sintering

=== Base Info ===

• Model NO.：MTW53,63,73
• Beads Per Meter：33, 35,36,37bpm
• Cutting Speed：15-80cm,Hour Down Speed
• Cutting Life Time：8-20m2,Lm
• Linear Speed Recommended：24-30m,S
• Transport Package：Carton Box and Crate
• Specification：6.3mm, 7.3mm, 8.4mm
• Trademark：KEENTOOL
• Origin：Quanzhou, China
• HS Code：82029910
• Production Capacity：10000m,Month

=== Description ===
SPECIFICATION OF BEADSOut DiameterLength of work layer (mm)Bead LengthManufacture Tech¢7.47.011Sintered¢8.06.011Sintered¢9.06.011Sintered
With multi diamond wire to cut slabs is a technique revolution for block cutting, with great advantages as below:

• Multi diamond wire is 10-15 times more effective than traditional gang saw cutting,
• Multi wire can cut stones with different hardness.
• The power cost is much lower than gang saw.
• Wire saw cutting makes lower noise
• The water demand for cutting is low, and it can be recycled.
• Multi wire cut makes small amount of stone powder, and easy to be cleaned and recycled.
• The multi wire machines do not take up much space for installation and work

• Keentool studies the granite to be cut to design the best bond, number of beads per meter;
• Keentool wires use the top quality steel cable from Germany or Italy
• KEENTOOL wires use the Bayer or BASF plastic grains from Germany, and the most advanced plastic injection equipment and system to make sure our diamond wire can work with stable performance till the end