Ni-Hard 4 Wear Plate Liners

• Certification：ISO 9001:2008
• Standard：ASTM
• Surface Treatment：Polishing
• Manufacturing Process：Casting
• Material：Cast Iron
• Transport Package：Polywood Pallet

=== Base Info ===

• Model NO.：custom
• Specification：HIGH GRADE
• Trademark：HYSTER, OEM
• Origin：China
• HS Code：84314991
• Production Capacity：100 Tons Per Month

=== Description ===
Mechanical propertyTensile strength630Mpa Min.Shearing strength250Mpa Min.Hardness63HRC min.
Types---the most common ones are:
Chocky bars
Standard wear bars
Shaped wear bars
Wear buttons& donuts
Shredder/Grinder hammer tips
Wear plates
Knife edges
Skid bars, skidblocks
Elbow wear blocks
Micro-ledges
Rockbox Liners
Other sizes and shapes
Multi-function gradient cutter tooth

Applications---Typical applications include the following for the Surge, Mining, Steel, Re-cycling, OEM, Aggregate and other Heavy Industries (to name only a few of the countless applications):

Chute Linings           Ore Chutes           Crusher Chutes                 Coal Transfer Chutes
Tripper Chutes          Flop Gates            Surge Bin Liners               Bucket Liners
Rock Box Liners        Skip Liners            Trough Liners                   Apron Feeder Liners
Draglines                    Shovels                  Screen Plates                   Loaders
Wear Aprons Concentration Bins Reclaimer Buckets
Loading Pocket Liners Transition Pieces Conveyor Transfer Points
Bolt Protectors Grizzly Bars Rock Box Edges
Hopper Edges Lip Protectors Adaptor Protectors
Deflector Plates Splitter/Divider Plates Wear Pads
Fan Blades Jaw Crushers Hammer Mill Inserts
Knife Inserts Crusher Bars Rolling Mill Guides
Run Out Rolls Dump Hoppers Crusher Hoppers
Floor Liners Arm & Hub Liners Truck Bed Liners
Bucket Liners Impact Wall Liners Distribution Plates
Elastomer Bonded Liners (Noise Reduction) Vibratory Feeders
Hopper (Receiving & Discharge) Liners Bucket Wheel Protection




Wear Plates

Available in a wide range of sizes, Hyper-wear Plates can be used in a combination of our standard sizes to create optimum layouts that provide the greatest impact and wear protection.

Suitable for use in chutes, hoppers, bins, liners, impact walls, rock boxes and a variety of other applications.

Very easy to use, no pre or post heating when welding.

*Unit: Millimeter (mm)
HP200-1 200X200X18
HP200-2 200X200X20
HP300-1 300X300X18
HP300-2 300X300X20

*We can accept OEM&ODM orders. Please contact us for any question.

More about our company and products, please do not hesitate to contact us. Thanks a lot!