10.5 mm 37 Bpm Plastic Assembly Basalt Cutting Diamond Wire Saw

• Application：Basalt Cutting
• Type：Plastic Diamond Wire
• Equipment Recommend：Pellegrini, Gaspari, Barsanti, Breton, Simec
• Reinforcement：Plastic and Steel Cable
• Type of Beads：Sintered or Free Sintering
• Beads Per Meter：33, 35,36,37bpm

=== Base Info ===

• Model NO.：FP 105
• Cutting Speed：15-80cm,Hour Down Speed
• Transport Package：Carton Box and Crate
• Specification：10.5 mm
• Trademark：KEENTOOL
• Origin：Quanzhou, China
• HS Code：82029910
• Production Capacity：20000m,Month

=== Description ===
SPECIFICATION OF BEADSOut DiameterLength of work layer (mm)Bead LengthManufacture Tech¢7.47.011Sintered¢8.06.011Sintered¢9.06.011Sintered
With multi diamond wire to cut slabs is a technique revolution for block cutting, with great advantages as below:

• Multi diamond wire is 10-15 times more effective than traditional gang saw cutting, 
• Multi wire can cut stones with different hardness. 
• The power cost is much lower than gang saw. 
• Wire saw cutting makes lower noise
• The water demand for cutting is low, and it can be recycled. 
• Multi wire cut makes small amount of stone powder, and easy to be cleaned and recycled. 
• The multi wire machines do not take up much space for installation and work

• Keentool studies the granite to be cut to design the best bond, number of beads per meter;
• Keentool wires use the top quality steel cable from Germany or Italy
• KEENTOOL wires use the Bayer  plastic grains from Germany, and the most advanced plastic injection equipment and system to make sure our diamond wire can work with stable performance till the end