Three Colour Plastic Lollipop Sticks Making Machine

=== Base Info ===

=== Description ===

Basic Info.

Model NO. SDS series Engagement System Full Intermeshing Screw Channel Structure Non Deep Screw Exhaust Don′t Exhaust Automation Automatic Computerized Computerized Cabinet Electric Parts ABB Siemens Schneider Delivery Time 20 Days Material Type PP PE Voltage 380V 50 Hz or Depends Required Inverter Delta or Required Transport Package Wood Base and Wood Case Specification standard or required Trademark DEEDO Origin Zhangjiagang City, China HS Code 84778000 Production Capacity 600 Sets/Yesr

Product Description

Product Description

1. Description:
The machine is used to produce the PP lollipop stick. It's an automatic and high speed model.
Colours: One colour.

2. Feather:
Notch cutter: One side one notch, one side two notches, each side one notch, no notch.
All the direct contact parts are made of stainless steel.
The cutting unit adopted the big plate cutter and with automatic gathering system.
The breaker, AC contactor and knob switch brand is SCHNEIDER
The inverter brand is DELTA
Raw material: Polypropylene (PP)
Specification: Diameter range for the stick: 2.5mm - 4.0mm
Length range for the stick: 75mm-115mm

3. Technic data:
Extruder
Main Screw dia. 50mm
L: D: 28: 1
Power of main motor: 11kw with Delta inverter
Heating section: 5
Capacity: 800-1000pcs/min. (Standard)
Water cooling bath
Length: 6.4m
Material: Stainless steel tank and frame.
Can be adjustment by front and back, right and left.
Hauling machine and cutting unit
Power of motor: 0.75kw with Delta inverter
Cutting with the special blades for Lollipop stick
Material of working table: Stainless steel
Air compressor

Our Services
1.We supply one year guarantee for all of our machines. 
2.We free supply 2 years normal spare parts for all of our machines.  
3.24 hours service.  
5.After service is full life of machine.  
 
All of our machines design and produce according to the CE standard.
When the machines are ready,our workshop director will run and check first,if it is ok,then
our QC department will testing it again to ensure the machine is runing and working well.
Then we will send the testing report to client for confirmation.
Our principle: only after testing, machine can leave the factory. and only qualified, it can be delivered.

if you are interested in this machine,please contact me:
 
mob:+86 13526472647