Fully Automatic Blow Molding Machine 4 Cavities Wide Mouth Bottle Making Blowing Molding ...

=== Base Info ===

=== Description ===
Machine(Machine dimension)M3.2*2.2*1.95.4*2.2*1.9(Machine weight)KG37004500Taizhou Huangyan Shuoqu Machinery Co., Ltd. is not only good in quality, but also can guarantee the quality of the machine for 24 hours of continuous production without waste, and the finished product rate is 100%. The company uses scientific production processes and advanced management to improve work efficiency, reduce labor intensity of workers, and save energy, thereby greatly reducing production costs and providing customers with a variety of high-quality and inexpensive production equipment. Customers come to the company to purchase equipment in an endless stream, especially our old customers. We are very grateful to our new and old customers for their trust and support. Our production workshop runs efficiently. Meet the needs of customers.
 

• Product manual

Machine features:
A. Using advanced microcomputer control system, stable performance;
B. The servo system automatically loads the billet.
C. The ruby infrared lamp is used for heating, with strong penetrating power, the preform is heated by rotation, orbit revolution, heating is uniform, fast and reliable; the width and height of the lamp and reflector in the heating zone can be adjusted to suit different structures The preform is heated, and there is an automatic temperature discharge device to ensure the constant temperature of the drying tunnel;
D. Each mechanical action has a safety self-locking device. When a process fails, the program will automatically switch to a safe state;
E. Each action is driven by an air cylinder and does not use an oil pump. It has the advantages of pollution-free and low noise. It adopts high pressure and double crank arm connecting rod to lock the mold, and the clamping force is strong;
F. There are two methods of operation: manual and fully automatic; safe, reliable and unique valve position design makes the gas path clear at a glance;
G. The production process is fully automated and has the advantages of low investment, high efficiency, convenient operation, simple maintenance, and safety.
H. The bottle body is free from pollution, and the scrap rate of the bottle is less than 0.001%. Machine advantages
1. The whole machine is designed in accordance with the linear high-speed machine, and the equipment is lengthened to ensure a high yield of the produced product. It can adapt to the rapid prototyping of various bottle types, and can adapt to the 24-hour environmental temperature change, and the equipment temperature does not change.
2. It adopts the nylon slider structure imported from the United States, which is wear-resistant to ensure the stable and long-term operation of the whole machine and will not be elongated by the center distance
3. Adopting double crank arm mold clamping + high pressure mold clamping to make the mold clamping machine run more smoothly and at high speed, with large clamping force and small stitching line. The clamping machine is equipped with a lubricating oil distribution system, which can evenly supply the lubricating oil to the joints of the double-crank arm to better protect the double-crank arm
4. Adopting an extended ruby infrared oven with fine fire and slow roasting, which can make the preform to be completely baked, and the temperature of the inner and outer surfaces is almost the same, which has ensured the rapid forming of the PET bottle, thereby increasing the output and the yield rate as high as 99.9%, easy to operate , There is no need to adjust the temperature of the oven frequently. The effect of lengthening is to save energy and increase the output. We use a lower temperature to slowly bake the tube embryos, while the ovens on the market are short, in order to bake the tube embryos to a certain extent. , It must be to increase the temperature of the lamp tube. This is the conclusion we reached after testing and comparing. The tube embryos baked like this must have inconsistent temperature inside and outside, and the forming effect is not as good as ours, especially for thick-walled bottles.
5. Using ruby infrared energy-saving lamps, the penetrating power is doubled than ordinary infrared lamps
6. One out of two automatic blowing molds, with positioning function, it only takes 5 minutes to replace the mold.
7. Stretch sealing cylinder (This sealing cylinder is our independent research and development design. Compared with the service life of several months on the market, ours has the advantage of long service life, which can reach 2 years.