Electrode Coating Machine Film Applicator Intermittent Coating for Lithium Ion Battery Production Line

• After-sales Service：Yes
• Warranty：Yes
• Type：Roll Coater
• Driven Type：Mechanical
• Automatic Grade：Semi-Automatic
• Packaging Material：Wood

=== Base Info ===

• Model NO.：GN-360
• Packaging Type：Cartons
• Application：for Battery Electrode Coating
• Transport Package：Export Standard Package
• Specification：effective coating width 300mm
• Trademark：Gelon
• Origin：China

=== Description ===

Basic Info.

Model NO. GN-360 Packaging Type Cartons Application for Battery Electrode Coating Transport Package Export Standard Package Specification effective coating width 300mm Trademark Gelon Origin China

Product Description

Electrode Coating Machine Film Applicator Intermittent Coating for Lithium Ion Battery Production Line 

I . Equipment specifications:
1, Substrate thickness: aluminum foil: 0.012--0.030mm copper foil: 0.008-0.030mm
2, Substrate width:aluminum foil:100-360mm  copper foil:100-360mm 
3, the maximum coating wet thickness:80--400µm (under the viscosity of the slurry allows)
4, the maximum coating width: 300mm,the maximum roller width:360mm
5, Mechanical traveling speed: 0.5-7M/min (maximum speed)
6, Coating speed: 0.5-1.5M/min (the speed is different according to the size of the slurry, this parameter is only based on the 4m oven length and the coating requirements of the lithium battery, a range is for reference) (super capacitor can coat faster, usually can set about 2M/min).
7, Total length of the machine: 1.5 m × 3 section oven = 4.5 m
II. Equipment performance
1, coating method: Transferred intermittent coating
Intermittent coating distance: 5-8000mm ± 1mm (according to battery specifications).
2, coating accuracy:
2.1. Dry thickness accuracy error: single-sided cathode: ±2.5μm  anode ±2.5μm (cross-section measurement 4-5 points, vertical section measurement spacing is 100mm).
2.2, the front and back coating alignment error: ≤ ± 1.0mm
2.3, average length error: ≤ ± 1.0mm
2.4, average width error: ≤ ± 1.0mm
Note: The above indicators 1 and 2 should be the best when the slurry conditions (viscosity, particle size, uniformity, etc.) match the settings of the various parameters of the equipment.
3, core diameter: 3 inches with air shaft
4, tension control: sprocket tension, counterweight constant tension
5, Correction controller accuracy: ±0.01mm; Correction accuracy: ±1mm
6, the operator operates the coating mechanism from the front
7, drying form:
7.1. hot air drying: hot air circulation (upper air supply);
7.2. Heating method: electric heating 6KW × 3 segments = 18KW;
7.3.heater;
8, oven length: 1.5M / section × 3 section (total 4.5M)
9, oven material: both inside and outside are made of stainless steel
10, oven temperature: room temperature - 150 ° C, two section can be independently adjustable, temperature control accuracy < ± 5 ° C;
I . Equipment specifications:
1, Substrate thickness: aluminum foil: 0.012--0.030mm copper foil: 0.008-0.030mm
2, Substrate width:aluminum foil:100-360mm  copper foil:100-360mm 
3, the maximum coating wet thickness:80--400µm (under the viscosity of the slurry allows)
4, the maximum coating width: 300mm,the maximum roller width:360mm
5, Mechanical traveling speed: 0.5-7M/min (maximum speed)
6, Coating speed: 0.5-1.5M/min (the speed is different according to the size of the slurry, this parameter is only based on the 4m oven length and the coating requirements of the lithium battery, a range is for reference) (super capacitor can coat faster, usually can set about 2M/min).
7, Total length of the machine: 1.5 m × 3 section oven = 4.5 m
II. Equipment performance
1, coating method: Transferred intermittent coating
Intermittent coating distance: 5-8000mm ± 1mm (according to battery specifications).
2, coating accuracy:
2.1. Dry thickness accuracy error: single-sided cathode: ±2.5μm  anode ±2.5μm (cross-section measurement 4-5 points, vertical section measurement spacing is 100mm).
2.2, the front and back coating alignment error: ≤ ± 1.0mm
2.3, average length error: ≤ ± 1.0mm
2.4, average width error: ≤ ± 1.0mm
Note: The above indicators 1 and 2 should be the best when the slurry conditions (viscosity, particle size, uniformity, etc.) match the settings of the various parameters of the equipment.
3, core diameter: 3 inches with air shaft
4, tension control: sprocket tension, counterweight constant tension
5, Correction controller accuracy: ±0.01mm; Correction accuracy: ±1mm
6, the operator operates the coating mechanism from the front
7, drying form:
7.1. hot air drying: hot air circulation (upper air supply);
7.2. Heating method: electric heating 6KW × 3 segments = 18KW;
7.3.heater;
8, oven length: 1.5M / section × 3 section (total 4.5M)
9, oven material: both inside and outside are made of stainless steel
10, oven temperature: room temperature - 150 ° C, two section can be independently adjustable, temperature control accuracy < ± 5 ° C;