Car Doors Single Screw Extruder Machine Seal Strip Profile Production Line

=== Base Info ===

=== Description ===

Basic Info.

Model NO. SJ45 SJ50 SJ65 SJ75 SJ80 SJ90 Engagement System Full Intermeshing Screw Channel Structure Non Deep Screw Exhaust Don′t Exhaust Automation Automatic Computerized Computerized Transport Package Wooden Package Specification 3600*1200*1600 Trademark Shuangda Origin China Production Capacity 20 Sets / Month

Product Description

Plastic Production Extruding Production Line


Overview: Production line: single screw extruder + mold + sink + traction +winder, Mold type: different mold do all kinds of shapes PVC sealing products Application: doors and windows, cars, containers, electric vehicles, refrigerators, sterilization cabinets and other sealing products.

Detailed introduction: The plastic sealing strip production line must go through two processes in production, one process is granulation. Granulation requires a crusher, kneader, pelletizer and pelletizer.

Extrusion process (soft strip) 1. The plastic particles are directly put into the extruder for extrusion production, 2. Cooled directly after forming the mold, 3. Then it can be produced after pulling the strip. If the extruded sliver does not meet the size required by our 4. or the raw material formula is not mastered, you can directly reprocess the made sliver through the crushing link.

Extrusion process rigid strip extrusion -cooling-traction-cutting about cooling principe here is more detailed introduction Sizing vacuum cooling table our enginner: hard material happened water easy deforming situation 1.cooling in Sizing mold in the water tank: vacuum pump will exhausted inside air of molds, cooling the molds and Sizing the profile. because inside molds will have a shape adhesive the profile and provide his support power, so will not happened deforming situation. 2. cooling in the water tank inside of water the profile will lack the support power/mold wall, so there will have deforming machine.