Blow Moulding Machine for Pet Bottles Making

=== Base Info ===

=== Description ===
Overview Product Description

Specifications

A.Brief Introduction
our machines are fully-automatic pet stretch-blow molding machines(preheat). It has 3 to 16 cavities and the maximum capacity of the products is 2000mL. It can blow bottles in shapes: carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET and PP etc.
1).High Automatization
2).High Intelligence:The machine can be controlled through touch screen and running status is shown on it.
3).High Quanlity:Steady infrared heating system blowing and highly precise blow-mould closing system ensure quality.
4).High Speed:6000BPH(6-cavity), 8000BPH(8-cavity), 12000BPH(12-cavity), 16000BPH(16-cavity).
5).No Contamination:Closed production zone, good self-lubrication system avoid contamination.
6).Low Cost:Low consumption of electricity, air and water.
7).High Transparency:Easy maintenance, absolute safely, visual inspection, low noise.
 
B.Settings:
a).PLC colour display: SIEMENS(GERMANY)
b).Pneumatic parts:FESTO(GERMANY)
c).Controller of preform transfer:Servo motor National(JAPAN)
d).Other electric parts are all world-famous brand

C.Machine Features:
C.1. Stable performance with advanced PLC.
C.2. Conveying preforms automatically with conveyor.
C.3. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
C.4. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
C.5. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
C.6. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
C.7. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
C.8. Strong clamping force with high pressure and double crank links to lock the mold.
C.9. Two ways of operating: automatic and manual.
C.10. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
C.11. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
C.12. Contamination is avoided for the bottle body.
C.13. Ideal effect of the chilling with the chilling system.
C.14. Easy installation and starting
C.15. Low rejection rate: less than 0.2 percent.

 

TYPE
ITEM
L3
L4
L6
L8
CONTAINER
Theoretical output
3000
4000
6000
8000
Max.container volume
2L
2L
0.7L
0.7L
Max.neck diameter
38mm
38mm
38mm
38mm
Max.container diameter
105mm
105mm
70mm
70mm
Max.container height
335mm
335mm
250mm
250mm
Max.perform height
150mm
150mm
130mm
130mm
Number of cavity
3
4
6
8
ELECTRICAL SYSTEM
Motor power
3KW
3KW
3KW
3KW
Heating power
30KW
33KW
35KW
45KW
Actual total power
33KW
36KW
38KW
48KW
AIR SYSTEM
Operataiting low pressure
0.7Mpa
0.7Mpa
0.8-1.0Mpa
0.8-1.0Mpa
Low pressure consuming
0.6-0.8m3/min
0.6-0.9m3/min
0.7-0.9m3/min
0.7-1.0m3/min
Blowing pressure
3.5Mpa
3.5Mpa
3.5Mpa
3.5Mpa
High pressure consuming
2-3m3/min
3-4m3/min
4-5m3/min
5-6m3/min
CHILLER WHATER
Operating pressure
0.3-0.5Mpa
0.3-0.5Mpa
0.3-0.5Mpa
0.3-0.5Mpa
Temperature
-10°C~55°C
-10°C~55°C
-10°C~55°C
-10°C~55°C
Flow rater
40L/min
40L/min
50L/min
70L/min
MACHINE
Machine dimension
3.5x2x2.2m
4x2x2.2m
4.9x2.15x2.2m
5.5x2.2x2.2m
Machine weight
4200Kg
4800Kg
5000Kg
5800Kg

 

About Sunswell