Triple Drum Sand Dryer for Dry Mortar Plant

• Model：3.2mx5.5m
• Object：Slag
• Voltage：380V
• Drum diameter：Φ2800mm
• Certification：ISO9001:2008
• Energy Saving：Energy Saving

=== Base Info ===

• Model NO.：NWD-30
• Warranty：5 Years
• Color：Silver
• Customized：Customized
• Condition：New
• Application：Dry Sand, Slag, Limestone
• Capacity：20tph
• Fuel：Gas, Oil, Coal or Biomass
• Powder：22kw
• Dust Collector：Cyclone and Tank Dust Collector
• Moisture Before Drying：15%
• Moisture After Drying：<0.5%
• Output Temperature：50-65°c
• Slag Size：<5mm
• Transport Package：Seaworthy Packing
• Specification：CE
• Trademark：NW
• Origin：Shanghai
• HS Code：8419399090
• Production Capacity：50 Sets,Year

=== Description ===

Basic Info.

Model NO. NWD-30 Warranty 5 Years Color Silver Customized Customized Condition New Application Dry Sand, Slag, Limestone Capacity 20tph Fuel Gas, Oil, Coal or Biomass Powder 22kw Dust Collector Cyclone and Tank Dust Collector Moisture Before Drying 15% Moisture After Drying <0.5% Output Temperature 50-65°c Slag Size <5mm Transport Package Seaworthy Packing Specification CE Trademark NW Origin Shanghai HS Code 8419399090 Production Capacity 50 Sets/Year

Product Description

Three drum sand dryer                        
The three drum sand dryer can be applied in drying raw materials such as yellow sand, slag, clay, quartz sand etc...It's widely used in industries such as dry mortar, cement, building materials, glass, chemicals, and casting etc.
the heat efficiency of three drum sand dryer can be up to 80%. shorter length, it's easy to arrange the work site. gas burner is clean and save space.   







General description:
 The dryer is assembled by three concentric-cylinders which halved joint with different diameters. Computer optimized stock 
guide and lifting blade with different angles and spacing are installed inside the 
cylinder, the structure can ensure that the material being dried runs along the
 direction of screw under the impact of gravitation, stay sufficient time and good 
dispersion in the cylinder to let the material exchange with the heat airflow from
 air heating furnace inside of the cylinder. The special three-cylinder structure 
makes the inner cylinder and middle cylinder being surrounded by the outer 
cylinder to form a self-contained thermal insulation system, the radiated heat 
from surface of inner and middle cylinder assist heat the material in the outer
 cylinder, but the outer cylinder is at the low temperature end, so the heat 
dissipation area and heat loss is reduced significantly.


Advantage:
1.Energy saving, the heat efficiency can be up to 80%,
2. Save space, just the 1/3 of single cylinder dryer.
3. Friction transmission, lower noise
4. Low dust pollution
5. The cylinder and flying plate use alloy steel, double service life than normal steel.
6. Can use coal, gas or oil as fuel.

Model	Capacity(T/hour)	Power(kw)	Dimension LXWXH(mm)
LCH-15	10~15	3X4	4860X2630X2960
LCH-30	20-30	5.5X4	6330X3230X3600
LCH-40	30-40	7.5X4	6970X3410X3790
LCH-50	40-50	11X4	8120X3660X4020
LCH-60	50-60	11X4	8620X3660X4020
LCH-80	60-80	15X4	9120X3860X4220